Advertisements
Advertisements
प्रश्न
Increasing the current passing through the wire decreases the magnetic field intensity.
पर्याय
Right
Wrong
Advertisements
उत्तर
Increasing the current passing through the wire decreases the magnetic field intensity- Wrong
APPEARS IN
संबंधित प्रश्न
Draw a schematic diagram of a circuit consisting of a battery of three cells of 2 V each, a 5 Ω resistor, an 8 Ω resistor, and a 12 Ω resistor, and a plug key, all connected in series.
What do the following symbols mean in circuit diagrams?
Draw circuit symbols for
a cell
Draw circuit symbols for
an open switch
What is a circuit diagram
Draw a circuit diagram to show how 3 bulbs can be lit from a battery so that 2 bulbs are controlled by the same switch the third bulb has its own switch.
Who will spend more electrical energy? 500 W TV Set in 30 mins, or 600 W heater in 20 mins?
Find the odd one out and justify it.
Fuse wire, M.C.B., Rubber Gloves, Generator
Observe the following figure which bulb get fuse?
The following figure shows the symbols for components used in the accompanying electrical circuit. Place them at proper places and complete the circuit.
Which law can you prove with the help of above circuit?
Write the condition required for a circuit to be a closed circuit.
Answer the following question.
With the help of a suitable circuit diagram prove that the reciprocal of the equivalent resistance of a group of resistances joined in parallel is equal to the sum of the reciprocals of the individual resistances.
What do you understand by the closed electric circuit
What is open circuit?
In any electric circuit, when the switch is on and the current flows through it why do the wire, switches, bulb or devices become hot?
The unit of electrical power is _______.
What is the use of earthing wire?
The switch is used to close or open an electric circuit.
In the circuit shown, which switches (L,M or N) must be closed to light up the bulb?
Higher Order Question
A student made a circuit by using an electric cell, a switch, a torch bulb (fitted in the bulb holder), and copper connecting wires. When he turned on the switch, the torch bulb did not glow at all. The student checked the circuit and found that all the wire connections were tight.
- What could be the possible reason for the torch bulb not glowing even when the circuit appears to be complete?
Fuse is
_____ has a thin metallic filament that melts and breaks the connection when the circuit is overheated.
Three bulbs are connected end to end from the battery. This connection is called _______.
______ is a kind of fish which is able to produce an electric current.
What are the types of electric circuits?
When an electric current flows through a copper wire AB as shown in the following figure, the wire
The ______ is a species of fish that can give electric shocks of up to six hundred fifty watts of electricity.
Match the following
| 1. | Insulator | a. | Coulomb |
| 2. | Conductor | b. | Electric circuit |
| 3. | Closed path | c. | Copper |
| 4. | Electric charge | d. | Rubber |
In the following arrangement shown in the following figure, the bulb will not glow if the ends A and B are connected with
Paheli is running short of connecting wires. To complete an electric circuit, she may use a ______.
Boojho has a cell and a single piece of connecting wire. Without cutting the wire in two, will he be able to make the bulb glow? Explain with the help of a circuit diagram.
How is Joule's law effect useful in electric circuits where fuse is used as a safety device?
Assertion: People struck by lightning receive a severe electrical shock.
Reason: Lightning carries very high voltage.
