Advertisements
Advertisements
प्रश्न
Paheli connected two bulbs to a cell as shown in the following figure.
She found that filament of bulb B is broken. Will the bulb A glow in this circuit? Give reason.
Advertisements
उत्तर
No, the bulb will not glow in this circuit as the filament of bulb B is broken. So the circuit remains incomplete.
APPEARS IN
संबंधित प्रश्न
Explain with the help of a labelled circuit diagram how you will find the resistance of a combination of three resistors, or resistance R1, R2 and R3, joined in parallel. Also mention how you will connect the ammeter and the voltmeter in the circuit when measuring the current in the circuit and the potential difference across one of the three resistors of the combination.
Who will spend more electrical energy? 500 W TV Set in 30 mins, or 600 W heater in 20 mins?
Two tungsten bulbs of power 50 W and 60 W work on 220 V potential difference. If they are connected in parallel, how much current will flow in the main conductor?
Match the column ‘A’ with column ‘B’.
|
Column ‘A’
|
Column ‘B’ |
|
(1) Eka - boron
|
(a) Germanium
|
|
(2) Eka - Aluminium
|
(b) Scandium
|
|
(3) Eka - Silicon
|
(c) Gallium |
_____ has a thin metallic filament that melts and breaks the connection when the circuit is overheated.
Our body is a ______ of electricity.
Observe the circuit given:
1. Would any of the bulbs glow when the switch is in the ‘OFF’ position?
2. What will be the order in which the bulbs A, B, and C will glow when the switch is moved to the ‘ON’ position?
In the following arrangement shown in the following figure, the bulb will not glow if the ends A and B are connected with
A complete circuit is left on for several minutes, causing the connecting copper wire to become hot. As the temperature of the wire increases, the electrical resistance of the wire
Set up the circuit shown in Figure again. Move the key to ‘ON’ position and watch carefully in which direction the compass needle gets deflected. Switch ‘OFF’ the current. Now keeping rest of the circuit intact, reverse the connections at the terminal of the cell. Again switch ‘on’ the current. Note the direction in which the needle gets deflected. Think of an explanation.
