मराठी

Redraw the circuit of question 1, putting in an ammeter to measure the current through the resistors and a voltmeter to measure the potential difference across the 12 Ω resistors.

Advertisements
Advertisements

प्रश्न

Redraw the circuit of question 1, putting in an ammeter to measure the current through the resistors and a voltmeter to measure the potential difference across the 12 Ω resistors. What would be the readings in the ammeter and the voltmeter?

संख्यात्मक
Advertisements

उत्तर

An ammeter should be connected in the circuit in series with the resistors. To measure the potential difference across the resistor it should be connected in parallel, as shown in the following figure.

The resistances are connected in series.

Ohm’s law can be used to obtain the readings of ammeter and voltmeter.

According to Ohm’s law,

V = IR,

Where,

Potential difference, V = 6 V

Current flowing through the circuit/resistors = I

Resistance of the circuit, R = 5 + 8 + 12 = 25Ω

I = `V/R`

= `6/25`

= 0.24 A

Potential difference across 12 Ω resistor = V1

Current flowing through the 12 Ω resistor, I = 0.24 A

Therefore, using Ohm’s law, we obtain

V1 = IR

= 0.24 × 12

= 2.88 V

Therefore, the reading of the ammeter will be 0.24 A.

The reading of the voltmeter will be 2.88 V.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 11: Electricity - Intext Questions [पृष्ठ १८५]

APPEARS IN

एनसीईआरटी Science [English] Class 10
पाठ 11 Electricity
Intext Questions | Q 13. | पृष्ठ १८५

संबंधित प्रश्‍न

Draw circuit symbols for 

fixed resistance


Draw the labelled diagram of an electric circuit comprising of a cell, a resistance, an ammeter, a voltmeter and a closed switch (or closed plug key). Which of the two has a large resistance : an ammeter or a voltmeter?


Find the odd one out and justify it.
Fuse wire, M.C.B., Rubber Gloves, Generator


Two tungsten bulbs of power 50 W and 60 W work on 220 V potential difference. If they are connected in parallel, how much current will flow in the main conductor?


What do you understand by the closed electric circuit


______ is the device used to close or open an electric circuit.


Three bulbs are connected end to end from the battery. This connection is called _______.


In a simple circuit, why does the bulb glow when you close the switch?


The wiring in a house consists of ______ circuits.


What is the role of the earth wire in domestic circuits?


Instead of metal wires, a jute string can be used to make a circuit.


______ is a kind of fish which is able to produce an electric current.


In a circuit, if the key is in open (off) condition, then electricity will not flow.


Choose the statement which is not correct in the case of an electric fuse.


Name the device used these days in place of electric fuses in electrical circuits.


Match the following

1. Insulator a. Coulomb
2. Conductor b. Electric circuit
3. Closed path c. Copper
4. Electric charge d. Rubber

In which of the following circuits A, B and C given in the following figure, the cell will be used up very rapidly?


Paheli connected two bulbs to a cell as shown in the following figure.


She found that filament of bulb B is broken. Will the bulb A glow in this circuit? Give reason.


A complete circuit is left on for several minutes, causing the connecting copper wire to become hot. As the temperature of the wire increases, the electrical resistance of the wire


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×