Advertisements
Advertisements
प्रश्न
Write scientific reason.
It is beneficial to carry electrical energy in AC form as it is carried over long distances.
Advertisements
उत्तर
- There is minimum power loss, when electrical energy is carried over long distances in the form of AC.
- Hence, it is beneficial to carry electrical energy in AC form as it is carried over long distances.
APPEARS IN
संबंधित प्रश्न
Draw a schematic diagram of a circuit consisting of a battery of three cells of 2 V each, a 5 Ω resistor, an 8 Ω resistor, and a 12 Ω resistor, and a plug key, all connected in series.
What do the following symbols mean in circuit diagrams?
Draw circuit symbols for
fixed resistance
Draw a circuit diagram to show how 3 bulbs can be lit from a battery so that 2 bulbs are controlled by the same switch the third bulb has its own switch.
Who will spend more electrical energy? 500 W TV Set in 30 mins, or 600 W heater in 20 mins?
In an electric circuit, electron flow a from of point of ______ potential to the point of ______ potential.
Distinguish between a closed circuit and an open circuit, with the use of suitable labelled diagrams.
Explain the following:
Open circuit
What is open circuit?
Increasing the current passing through the wire decreases the magnetic field intensity.
Flow of electricity through a closed circuit is _____.
______ is the device used to close or open an electric circuit.
Draw the circuit diagram for the series connection.
Higher Order Question
A student made a circuit by using an electric cell, a switch, a torch bulb (fitted in the bulb holder), and copper connecting wires. When he turned on the switch, the torch bulb did not glow at all. The student checked the circuit and found that all the wire connections were tight.
- What could be the possible reason for the torch bulb not glowing even when the circuit appears to be complete?
What is electric circuit?
State whether true or false. If false, correct the statement.
Ammeter is connected in parallel in any electric circuit.
In a simple circuit, why does the bulb glow when you close the switch?
When a circuit is open, _____ cannot pass through it.
A device that is used to break an electric circuit is called ______.
What are the types of electric circuits?
In the following circuits (Figure), heat produced in the resistor or combination of resistors connected to a 12 V battery will be
 |
 |
 |
| (i) | (ii) | (iii) |
In an electrical circuit three incandescent bulbs A, B and C of rating 40 W, 60 W and 100 W respectively are connected in parallel to an electric source. Which of the following is likely to happen regarding their brightness?
A child has drawn the electric circuit to study Ohm’s law as shown in Figure. His teacher told that the circuit diagram needs correction. Study the circuit diagram and redraw it after making all corrections.
In an electric circuit, the current starts from ______.
Three bulbs A, B, C are connected in a circuit as shown in the following figure. When the switch is ‘ON’
In an electric circuit a fuse is a ______ ______ to prevent possible fire.
Match the following
| 1. | Insulator | a. | Coulomb |
| 2. | Conductor | b. | Electric circuit |
| 3. | Closed path | c. | Copper |
| 4. | Electric charge | d. | Rubber |
What are the essential components of an electric circuit?
In the following arrangement shown in the following figure, the bulb will not glow if the ends A and B are connected with
Set up the circuit shown in Figure again. Move the key to ‘ON’ position and watch carefully in which direction the compass needle gets deflected. Switch ‘OFF’ the current. Now keeping rest of the circuit intact, reverse the connections at the terminal of the cell. Again switch ‘on’ the current. Note the direction in which the needle gets deflected. Think of an explanation.
