मराठी

Judge the equivalent resistance when the following are connected in parallel − (a) 1 Ω and 106Ω, (b) 1 Ω and 103Ω and 106Ω.

Advertisements
Advertisements

प्रश्न

Judge the equivalent resistance when the following are connected in parallel − (a) 1 Ω and 106Ω, (b) 1 Ω and 103Ω and 106Ω.

संख्यात्मक
Advertisements

उत्तर

(a) When 1 Ω and 106 Ω are connected in parallel:
Let R be the equivalent resistance.

R2 = 106 Ω    .....[given]

`1/"R" = 1/1 + 1/10^6`

`1/"R" = (10^6 + 1)/10^6`

R = `10^6/(1 + 10^6)` ≈ 1 Ω

R ≈ 1 Ω

Therefore, equivalent resistance ≈ 1 Ω

(b) When 1Ω, 103 Ω and 106 Ω are connected in parallel:

Let R be the equivalent resistance.

`1/"R" = 1/"R"_1 + 1/"R"_2 + 1/"R"_3`

R1 = 1 Ω    .....[given]

R2 = 103 Ω

R3 = 106 Ω

`1/"R" = 1/1 + 1/10^3 + 1/10^6`

`1/"R" = (10^6 + 10^3 + 1)/10^6`

`1/"R" = 1001001/1000000`

R = `1000000/1001001` ≈ 0.999 Ω ≈ 1 Ω

R ≈ 1 Ω

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 11: Electricity - Intext Questions [पृष्ठ १८८]

APPEARS IN

एनसीईआरटी Science [English] Class 10
पाठ 11 Electricity
Intext Questions | Q 14. | पृष्ठ १८८

संबंधित प्रश्‍न

Find the expression for the resistors connected in series and write the two characteristics of it. (Draw figure).


(i) Two sets A and B, of three bulbs each, are glowing in two separate rooms. When one of the bulbs in set A is fused, the other two bulbs also cease to glow. But in set B, when one bulb fuses, the other two bulbs continue to glow. Explain why this phenomenon occurs.

(ii) Why do we prefer arrangements of Set B for house circuiting?


 


In series combination of resistances ______.


What is electrical resistance? Write its SI unit.

What are the SI units of specific resistance?

The potential difference between the terminals of an electric iron is 240 V and the current flowing through it is 6 A. What is the resistance of the electric iron?

Two bulbs of 100 W and 40 W are connected in series. The current through the 100 W bulb is 1 A. The current through the 40 W bulb will be ______.


How does the resistance of an alloy, vary with temperature?


The voltage applied to a given rheostat is made four times its initial value. By what factor will be resistance of the rheostat change?


You are provided with three resistors of resistance 1.0 Ω, 2.0 Ω and 3.0 Ω How would you connect them to obtain the total effective resistance 1.5 Ω? Draw diagram of the arrangement and check it by calculations.


Six resistances are connected together as shown in the figure. Calculate the equivalent resistance between points A and B.


In the circuit shown below, calculate the equivalent resistance between the points (i) A and B, (ii) C and D.


Two lamps of resistance 30Ω and 20Ω respectively are connected in series in a 110V circuit. Calculate:
(i) the total resistance in the circuit
(ii) the current in the circuit, and
(iii) the voltage drop across each lamp.


2Ω resistor A, 1Ω resistor B and 4Ω resistor C are connected in parallel. The combination is connected across a 2V battery of negligible resistance. Draw the diagram of the arrangement and calculate:
(i) The current in each resistor A and C,
(ii) The current through battery.


Two resistors of 4Ω and 6Ω are connected in parallel to a cell to draw 0.5 A current from the cell.
Draw a labelled circuit diagram showing the above arrangement.


Two wires of same material and same lengths have radii in the ratio of 2 : 3, Compare their resistances.


Show how you would connect three resistors, each of resistance 6 Ω, so that the combination has a resistance of 4 Ω.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×