Advertisements
Advertisements
प्रश्न
In series combination which remains constant?
(a) Voltage
(b) Current
(c) Both current and voltage
(d) Both are variables
Advertisements
उत्तर
(b) Current
When a potential difference is applied across a combination of resistors in series, the same current flows through each resistor.
APPEARS IN
संबंधित प्रश्न
Complete the following :-
(a)
If the equivalent resistance is to be increased, then the number of resistances should be connected in
- Series
- Parallel
- Mixed arrangement
- None of the above
A piece of wire of resistance R is cut into five equal parts. These parts are then connected in parallel. If the equivalent resistance of this combination is R’, then the ratio `"R"/"R'"` is ______.
Find the equivalent resistance between points A and B.
Find the equivalent resistance between points A and B
If the length of a wire is doubled by taking more of wire, what happens to its resistance?
How does the presence of impurities in a metal affect its resistance?
How does the resistance of a wire change when:
its length is tripled?
Two resistances X and Y are connected turn by turn:
- in parallel, and
- in series.
In which case the resultant resistance will be less than either of the individual resistances?
You have three resistors of values 2 `Omega`, 3 `Omega`, and 5 `Omega`. How will you join them so that the total resistance is less than 2 `Omega`?
What do you mean by power rating of an electrical appliance? How do you use it to calculate
(a) the resistance of the appliance and
(b) the safe limit of the current in it, while in use?
To increase the effective resistance in a circuit, the resistors are connected in _______________ .
Define the term resistivity and state its S.I. unit. Which will have higher resistivity a conductor or an insulator.
What is a resistance? Define it with respect to Ohm’s law,
State and explain the laws of resistance.
Calculate the quantity of heat that will be produced in a coil of resistance 75 Ω if a current of 2A is passed through it for 2 minutes.
Two electric bulbs have resistances in the ratio 1 : 2. If they are joined in series, the energy consumed in them is in the ratio:
Show how you would connect three resistors, each of resistance 6 Ω, so that the combination has a resistance of 4 Ω.
