Advertisements
Advertisements
प्रश्न
Calculate the combined resistance in the given case:
Advertisements
उत्तर
Given: R1= 500 Ω
R2 = 1 k Ω = 1000 Ω
From the given circuit diagram,
R = R1 + R2
R = 500 + 1000
R = 1500 Ω
∴ The combined resistance in the given case is 1500 Ω.
APPEARS IN
संबंधित प्रश्न
(i) Two sets A and B, of three bulbs each, are glowing in two separate rooms. When one of the bulbs in set A is fused, the other two bulbs also cease to glow. But in set B, when one bulb fuses, the other two bulbs continue to glow. Explain why this phenomenon occurs.
(ii) Why do we prefer arrangements of Set B for house circuiting?
If five resistances, each of value 0.2 ohm, are connected in series, what will be the resultant resistance?
Two resistances X and Y are connected turn by turn:
- in parallel, and
- in series.
In which case the resultant resistance will be less than either of the individual resistances?
The diagram below shows part of a circuit:
If this arrangement of three resistors was to be replaced by a single resistor, its resistance should be:
(a) 9 Ω
(b) 4 Ω
(c) 6 Ω
(d) 18 Ω
State how are the two resistors joined with a battery when same current flows in each resistor.
In series combination of resistances ______.
What is the equivalent resistance between A and B in the given circuit (Fig?)
Three resistors of 6.0 Ω, 2.0 Ω and 4.0 Ω are joined to an ammeter A and a cell of emf 6.0 V as shown in the following figure. Calculate :
- the effective resistance of the circuit.
- the reading of ammeter.
Name the material of wire used for making standard resistances. Give a reason.
State expression for Cells connected in parallel.
Calculate the equivalent resistance between the points A and B for the following combination of resistors:
Three resistors of 6Ω, 3Ω and 2Ω are connected together so that their total resistance is greater than 6Ω but less than 8Ω Draw a diagram to show this arrangement and calculate its total resistance.
Calculate the quantity of heat that will be produced in a coil of resistance 75 Ω if a current of 2A is passed through it for 2 minutes.
Two wires of same material and same lengths have radii in the ratio of 2 : 3, Compare their resistances.
Two resistors having 2Ω and 3Ω resistance are connected—(i) in series, and (ii) in parallel. Find the equivalent resistance in each case.
Two wires of the same length and area made of two materials of resistivity ρ1 and ρ2 are connected in series to a source of potential V. The equivalent resistivity for the same area is:
If R1 and R2 be the resistance of the filament of 40 W and 60 W respectively operating 220 V, then:
