Advertisements
Advertisements
प्रश्न
_______ forms a green colour in the water.
पर्याय
CuSO4
FeSO4
NaCl
all the above
Advertisements
उत्तर
FeSO4 forms a green colour in the water.
APPEARS IN
संबंधित प्रश्न
Why do we apply paint on iron articles?
Which metals do not corrode easily?
Explain why rusting of iron objects is faster in coastal areas than in deserts.
Explain why Iron sheets are coated with zinc during galvanization.
What type of chemical reaction is involved in the corrosion of iron?
Name the metal which is used for galvanising iron.
Explain why, iron sheets are coated with zinc.
State two conditions for the rusting of iron.
Fill in the following blanks with suitable words:
Tiffin boxes are electroplated with .............. but car bumpers are electroplated with ............... to protect them from rusting.
Give the constituents and one use of brass.
In stainless steel alloy, iron metal is mixed with:
(a) Cu and Cr
(b) Cr and Ni
(c) Cr and Sn
(d) Cu and Ni
If copper is kept exposed to damp air for a considerable time, it gets a green coating on its surface. This is due to the formation of:
(a) hydrated copper sulphate
(b) copper oxide
(c) basic copper carbonate
(d) copper nitrate
No chemical reaction takes place when granules of a rusty-brown solid A are mixed with the powder of another solid B. However, when the mixture is heated, a reaction takes place between its components. One of the products C is a metal and settles down in the molten state while the other product D floats over it. It was observed that the reaction is highly exothermic.
(a) What could the solids A and B be?
(b) What are the products C and D most likely to be?
(c) Write the chemical equation for the reaction between A and B leading to the formation of C and D. Mention the physical states of all the reactants and products in this equation and indicate the heat change which takes place.
(d) What is the special name of such a reaction? State one use of such a reaction.
(e) Name any two types of chemical reactions under which the above reaction can be classified.
Mention two uses of the following metals and non-metals
Iron
Explain how the activity series accounts for each of the following:
tendency to corrosion
Corrosion can be an advantage in some case.Explain ?
No chemical reaction takes place when granules of a solid, A, are mixed with the powder of another solid, B. However when the mixture is heated, a reaction takes place between its components. One of the products, C, is a metal and settles down in the molten state while the other product, D, floats over it. It was observed that the reaction is highly exothermic.
(i) Based on the given information make an assumption about A and B and write a chemical equation for the chemical reaction indicating the conditions of reaction, physical state of reactants and products and thermal status of reaction.
(ii) Mention any two types of reactions under which above chemical reaction can be classified.
Observe the following picture a write down the chemical reaction with the explanation.
Answer the following question.
a) What is meant by corrosion?
b) Write names of any two methods of prevention of corrosion.
c) In which method, metal like copper, aluminium are coated with a thin layer of their oxides by means of electrolysis.
d) Explain this method with diagram.
Answer the following question:
What is corrosion? Do gold ornaments corrode? Justify.
Give reason.
A wooden article should be polished.
Explain the term – rusting and give a word equation for the formation of rust. If polished iron nails are kept in three separate test tubes, state the contents in each test tube required, to prove the conditions for rusting.
Which of the following method is used to prevent the accumulation of greenish layer on brass due to corrosion?
Rusting of iron : Fe2O3 : : corrosion of copper : ______
Bronze : _______ : : Stainless steel : Fe + Cr + C
Find the odd one out and give its explanation.
Write the name.
An alloy of copper and tin-
Write scientific reason.
Coins are made from metals and alloys.
Draw a neat labelled diagram.
Electroplating
Write a molecular formula for rust.
Give preventive methods by giving examples of corrosion?
What is rust?
Galvanisation is a method of protecting iron from rusting by coating it with a thin layer of ____________.
Alloys are homogeneous mixtures of a metal with a metal or nonmetal. Which among the following alloys contain non-metal as one of its constituents?
Galvanisation is a process used to prevent the rusting of which of the following?
