Advertisements
Advertisements
प्रश्न
Name two effects produced by electric current.
Advertisements
उत्तर
The two effects produced by an electric current are:
(i) Heating effect
(ii) Chemical effect
APPEARS IN
संबंधित प्रश्न
By what name is the physical quantity coulomb/second called?
Write down the formula which relates electric charge, time and electric current
If the charge on an electron is 1.6 × 10−19 coulombs, how many electrons should pass through a conductor in 1 second to constitute 1 ampere current?
One coulomb of charge flows through any cross-section of a conductor in 1 second. What is the current flowing through the conductor?
(a) With the help of a circuit diagram, obtain the relation for the equivalent resistance of two resistances connected in parallel.
(b) In the circuit diagram shown below, find:
(i) Total resistance.
(ii) Current shown by the ammeter A
Ten bulbs are connected in a series circuit to a power supply line. Ten identical bulbs are connected in a parallel circuit to an identical power supply line.
(a) Which circuit would have the highest voltage across each bulb?
An electrician has wired a house in such a way that if a lamp gets fused in one room of the house, all the lamps in other rooms of the house stop working. What is the defect in the wiring?
The rating of a fuse connected in the lighting circuit is:
(a) 15 A (b) 5 A (c) 10 A (d) Zero
Three resistors of 6.0 𝛀, 2.0𝛀 and 4.0𝛀 are joined to an ammeter A and a cell of e.m.f. 6.0 V as
shown in fig 8.52 Calculate:
(a) the effective resistance of the circuit and
(b) the reading of ammeter.
Complete the following sentence:
Fuse wire has a ............ Melting point and it is made of an alloy of ......... and if the current in a circuit rises too high, the fuse wire ...........
Two resistors of 4 Ω and 6 Ω are connected in parallel. The combination is
connected across a 6 volt battery of negligible resistance. Calculate:
( i) The power supplied by the battery,
(ii) The power dissipated in each resistor.
Define the following:
Electromotive force
Tick (✓) the correct choice among the following :
Which of the following changes would enable a millimeter to be used as a
direct current ammeter reading upto 1 A?
Fig . shows the core of a transformer and i ts input and output connections
State the material used for the core and describe th e structure of the core.
(a) Use the values given in the diagram to calculate the turns ratio for the transformer and connections, labeling all parts of the diagram .
(b) If a current of 2 A is taken from th e output, calculate th e current in the input circuit (Assume the transformer to be ideal ).
Electrical power P is given by the expression P = (Q × V) ÷ time
(a) What do the symbols Q and V represent?
(b) Express the power P in terms of current and resistance explaining the meanings of symbols used there in.
Kilowatt hour is the unit of
The flow of electric charge per unit time is called potential difference.
