Advertisements
Advertisements
प्रश्न
In the figure below, the ammeter A reads 0.3 A. Calculate:
(i) the total resistance of the circuit
(ii) the value of R
(iii) the current flowing through R.

Advertisements
उत्तर
(i) ∵ V = IR
∴ R = `"V"/"I" = 6.0/0.3 = 20 Ω`
(ii) Total resistance = 20 Ω
∵ Resistance in parallel
∴ `1/20 = 1/"R" + 1/60`
`1/"R" = 1/20 - 1/60`
`1/"R" = (3 - 1)/60`
R = `60/2 = 30 `Ω
(iii) ∵ V = IR
and potential (V) is equal at the two ends i.e. A and B

Let I1 be current flowing through R
∴ (0.3 - I1) is current flowing through 60 Ω resistance.
Now V = V ⇒ I1R1 = I2R2
I1 × 30 = (0.3 - I1) × 60
I1 = 0.6 - 2I1
3I1 = 0.6
I1 = `0.6/3 = 0.2`
∴ Current flowing through R = 0.2 A
संबंधित प्रश्न
What are the advantages of connecting electrical devices in parallel with the battery instead of connecting them in series?
Find the current in each resistor in the circuit shown below:

Two resistors, with resistance 5 Ω and 10 Ω respectively are to be connected to a battery of emf 6 V so as to obtain:
(i) minimum current flowing
(ii) maximum current flowing
(a) How will you connect the resistances in each case?
(b) Calculate the strength of the total current in the circuit in the two cases.
You are given three resistances of 1, 2 and 3 ohms. Shows by diagrams, how with the help of these resistances you can get:
(i) 6 Ω
(ii) `6/1` Ω
(iii) 1.5 Ω
State how are the two resistors joined with a battery when potential difference is same across each resistor.
You have three resistors of values 2Ω, 3Ω and 5Ω. How will you join them so that the total resistance is less than 1Ω? Draw diagram and find the total resistance.
Calculate the equivalent resistance between the points A and B in Fig. if each resistance is 2·0 Ω.

Explain, why is the p.d. between the terminals of a storage battery less when it is supplying current than when it is on open circuit. A battery of e.m.f. 10 volts and internal resistance 2.5 ohms has two resistances of 50 ohms each connected to it. Calculate the power dissipated in each resistance
(a) When they are in series,
(b) When they are in parallel.
In each case calculate the power dissipated in the battery.
State the S.I. unit of electrical resistance and define it.
Calculate equivalent resistance in the following cases:


