Advertisements
Advertisements
Question
What is meant by the heating effect of current?
Advertisements
Solution
When an electric current is passed through a high resistance wire, like nichrome wire, the resistance wire becomes very hot and produces heat. This is called the heating effect of current. The heating effect of current is obtained by transforming electrical energy into heat energy.
APPEARS IN
RELATED QUESTIONS
Why does the cord of an electric heater not glow while the heating element does?
An electric heater of resistance 8 Ω draws 15 A from the service mains 2 hours. Calculate the rate at which heat is developed in the heater.
Why is the tungsten used almost exclusively for filament of electric lamps?
A resistance of 25 Ω is connected to a 12 V battery. Calculate the heat energy in joules generated per minute.
The current passing through an electric kettle has been doubled. The heat produced will become:
(a) half
(b) double
(c) four time
(d) one-fourth
The elements of electrical heating devices are usually made of:
(a) tungsten
(b) bronze
(c) nichrome
(d) argon
Which of the following characteristic is not suitable for a fuse wire?
(a) thin and short
(b) thick and short
(c) low melting point
(d) higher resistance than rest of wiring
Solve the following example.
Two tungsten bulbs of wattage 100 W and 60 W power work on 220 V potential difference. If they are connected in parallel, how much current will flow in the main conductor?
Give scientific reason :
In the electric equipment producing heat e.g. iron, electric heater, boiler, toaster, etc., an alloy such as Nichrome is used, not pure metals.
Rewrite the following statement by selecting the correct option:
1 A = ____________ mA.
Compute the heat generated while transferring 96000 coulombs of charge in two hours through a potential difference of 40 V.
Which of the following substance contracts on heating?
Find the odd one out and give its explanation.
Explain the importance/uses of fuse wire.
(a) Observe the diagram given below and state whether the bulb will glow or not when we switch on K.
(b) Is it safe to handle the bulb when the switch is OFF?
(c) Give a reason for your answer in (b).
Can we use the same fuse in a geyser and a television set? Explain.
Name two electric devices for each where
- heating effect of current is used and
- magnetic effect of current is used.
Your teacher has shown you the following activity.
Activity: Teacher has wound a long insulated piece of wire around an iron nail in the form of a coil. Free ends of the wire are connected to a cell through a switch as shown in the following figure. The current is switched on and some pins are placed near the ends of the nail.
Write down any three questions that come to your mind about this activity.
Find the odd one out.
The graph of voltage vs current for four different materials is shown below.
Which of these four materials would be used for making filament of bulb?
