Advertisements
Advertisements
Question
The error in the measurement of the sides of a rectangle is 1%. The error in the measurement of its area is ______.
Options
1%
`(1//2)`%
2%
None of the above
Advertisements
Solution
The error in the measurement of the sides of a rectangle is 1%. The error in the measurement of its area is 2%.
Explanation:
A = l × b
∴ `(triangle"A")/"A" = (trianglel)/l + (triangle "b")/"b"` = 1% + 1% = 2
APPEARS IN
RELATED QUESTIONS
Define absolute error.
Define relative error.
Answer the following question.
Show that if Z = `"A"/"B"`, `(triangle"Z")/"Z" = (triangle"A")/"A" + (triangle "B")/"B"`
The masses of two bodies are measured to be 15.7 ± 0.2 kg and 27.3 ± 0.3 kg. What is the total mass of the two and the error in it?
In a workshop, a worker measures the length of a steel plate with Vernier calipers having a least count 0.01 cm. Four such measurements of the length yielded the following values: 3.11 cm, 3.13 cm, 3.14 cm, 3.14 cm. Find the mean length, the mean absolute error, and the percentage error in the measured value of the length.
Find the percentage error in kinetic energy of a body having mass 60.0 ± 0.3 g moving with a velocity of 25.0 ± 0.1 cm/s.
Solve the numerical example.
If the length of a cylinder is l = (4.00 ± 0.001) cm, radius r = (0.0250 ± 0.001) cm and mass m = (6.25 ± 0.01) g. Calculate the percentage error in the determination of density.
In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, 3% and 4% respectively. Then the maximum percentage of error in the measurement X, where X = `(A^2B^(1/2))/(C^(1/3)D^3)`, will be:
If Q = `"X"^"n"/"Y"^"m"` and Δx is absolute error in the measurement of X, Δy is absolute error in the measurement of Y, then absolute error ΔQ in Q is ______.
The vernier scale of a travelling microscope has 50 divisions which coincide with 49 main scale divisions. If each main scale division is 0.5 mm, calculate the minimum inaccuracy in the measurement of distance.
A physical quantity X is related to four measurable quantities a, b, c and d as follows: X = a2 b3 c5/2d–2. The percentage error in the measurement of a, b, c and d are 1%, 2%, 3% and 4%, respectively. What is the percentage error in quantity X? If the value of X calculated on the basis of the above relation is 2.763, to what value should you round off the result.
The resistance R = `"V"/"I"`, where V = (50 ± 2) V and I = (20 ± 0.2)A. The percentage error in R is 'x' %.
The value of x to the nearest integer is ______.
The dependence of g on geographical latitude at sea level is given by `g = g_0(1 + betasin^2Phi)` where Φ is the latitude angle and β is a dimensionless constant. If Δg is the error in the measurement of g then the error in measurement of latitude angle is ______.
A travelling microscope has 20 divisions per cm on the main scale while its Vernier scale has total 50 divisions and 25 Vernier scale divisions are equal to 24 main scale divisions, what is the least count of the travelling microscope?
The least count of the main scale of a screw gauge is 1 mm. The minimun number of divisions on its circular scale required to measure 5 µm diameter of a wire is ______.
If the zero of the vernier lies on the right-hand side and the fourth division coincides with the main scale division when the jaws are in contact so the correction will be ______.
A thermometer always reads 2°C higher than the actual temperature because its zero mark is incorrect. What type of error is this?
A laboratory balance shows a mass reading even when no object is placed on the pan. What is the main cause of this error?
A weighing scale that always reads a constant +0.2 kg because its zero mark is misaligned is a clear example of a(n):
Which one of the following is an effective way to reduce systematic errors in an experiment?
Zero error of an instrument introduces ______.
Instrumental error can be minimised by ______.
Error due to non-removal of parallax between pointer and its image in case of magnetic compass needle causes ______.
The reason behind holding thermometer in the mouth instead of the armpit is to reduce ______.
Constant error can be caused due to ______.
