English

State Two Factors on Which the Magnitude of Induced E.M.F. Depend.

Advertisements
Advertisements

Question

State two factors on which the magnitude of induced e.m.f. depend.

Advertisements

Solution

Magnitude of induced e.m.f depend upon:
(i) The change in the magnetic flux.
(ii) The time in which the magnetic flux changes.

shaalaa.com
  Is there an error in this question or solution?

RELATED QUESTIONS

Mention various energy losses in transformer device


You are required to make an electromagnet from a soft iron bar by using a cell, an insulated coil of copper wire and a switch. (a) Draw a circuit diagram to represent the process. (b) label the poles of the electromagnet.


The following diagram in Fig. 10.44 shows a coil X connected to a sensitive centre –zero galvanometer G and a coil P connected to a battery through a switch S.

(a) Describe the observation when the switch S is (i) closed suddenly, (ii) then kept closed, (iii) finally opened.
(b) Name and state the law which explains the above observations.


The input and output voltages of a transformer are 220 V and 44V respectively. Find the current in input circuit if the output current is 2 A.


Applying e.m. f to primary coil is 210 V. If the number of turns in primary coil is 200 turns and that of in secondary coil is 20 turns, then find out the output voltage. Name the type of transformer.


A 200V/120V step-down transformer of 90% efficiency is connected to an induction stove of resistance 40 Ω. Find the current drawn by the primary of the transformer.


The output power in step-up transformer used in practice is ______.


A 220 V input is supplied to a transformer. The output circuit draws a current of 2.0 A at 440 V. If the ratio of output to input power is 0.8, then the current drawn by primary winding is ______.


A 60 W load is connected to the secondary of a transformer whose primary draws line voltage. If a current of 0.54 A flows in the load, what is the current in the primary coil? Comment on the type of transformer being used.


An iron rod is placed parallel to magnetic field of intensity 2000 Am-1. The magnetic flux through the rod is 6 × 10−4 Wb and its cross-sectional area is 3 cm2. The magnetic permeability of the rod in Wb A-1m-1 is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×