English

Define Coefficient of Mutual Induction.

Advertisements
Advertisements

Question

Define coefficient of mutual induction. 

Advertisements

Solution

Coefficient of mutual induction is defined as the e.m.f induced in the secondary coil per unit rate of change of current in the primary coil (neighbouring coil).

shaalaa.com
  Is there an error in this question or solution?
2013-2014 (October)

APPEARS IN

RELATED QUESTIONS

Explain the meaning of the term mutual inductance.


Define mutual inductance.


In an experiment, two coils c1 and c2 are placed close to each other. Find out the expression for the emf induced in the coil c1 due to a change in the current through the coil c2.


A long solenoid with 15 turns per cm has a small loop of area 2.0 cmplaced inside the solenoid normal to its axis. If the current carried by the solenoid changes steadily from 2.0 A to 4.0 A in 0.1 s, what is the induced emf in the loop while the current is changing?


A 1.0 m long metallic rod is rotated with an angular frequency of 400 rad s−1 about an axis normal to the rod passing through its one end. The other end of the rod is in contact with a circular metallic ring. A constant and uniform magnetic field of 0.5 T parallel to the axis exists everywhere. Calculate the emf developed between the centre and the ring.


An air-cored solenoid with length 30 cm, area of cross-section 25 cm2 and number of turns 500, carries a current of 2.5 A. The current is suddenly switched off in a brief time of 10−3 s. How much is the average back emf induced across the ends of the open switch in the circuit? Ignore the variation in magnetic field near the ends of the solenoid.


Explain the phenomenon of mutual induction.


A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 20 A in 0.5 s, what is the change of flux linkage with the other coil?


Consider two concentric circular coils, one of radius r1 and the other of radius r2 (r1 < r2) placed coaxially with centers coinciding with each other. Obtain the expression for the mutual inductance of the arrangement.


Two circular loops are placed with their centres separated by a fixed distance. How would you orient the loops to have (a) the largest mutual inductance (b) the smallest mutual inductance?


Find the mutual inductance between the circular coil and the loop shown in figure.


A pair of adjacent coils has a mutual inductance of 1.5 H. If the current in one coil changes from 0 to 10 A in 0.2 s, what is the change of flux linkage with the other coil?


An emf of 96.0 mV is induced in the windings of a coil when the current in a nearby coil is increasing at the rate of 1.20 A/s. What is the mutual inductance (M) of the two coils?


A long solenoid of length l, cross-sectional area A and having N1 turns (primary coil), has a small coil of N2 turns (secondary coil) wound about its center. Determine the Mutual inductance (M) of the two coils.


The mutual inductance of two coils is 10 mH. If the current in one of the coil changes from 5 A to 1 A in 0.2 s, calculate the emf induced in the other coil. Also calculate the induced charge flowing through the coil if its resistance is 5 Ω.


A pair of the adjacent coil has a mutual inductance of 1.5 H. If the current in one coil varies from 0 to 20 A in 0.5 s, what is the change of flux linked with the other coil. 


Define mutual inductance.


The dimensions of self or mutual inductance are given as ______.


In mutual induction, the main current remains same because ____________.


In an induction coil, the coefficient of mutual inductance is 6 henry. If a current of 10 ampere in the primary coil is cut-off in `1/1500"s"`, the e.m.f. at the terminals of the secondary coil will be ____________.


A current I = 10 sin (50 π t) ampere is passed in the first coil which induces a maximum e.m.f. of 5 π volt in the second coil. The mutual inductance between the coils is ______.


A coil of radius 'r' is placed on another coil (whose radius is 'R' and current flowing through it is changing) so that their centres coincide. (R>>r) if both the coils are coplanar then the mutual inductance between them is proportional to ______.


Two different wire loops are concentric and lie in the same plane. The current in the outer loop (I) is clockwise and increases with time. The induced current in the inner loop.


Alternating current of peak value `(2/pi)` ampere flows through the primary coil of transformer. The coefficient of mutual inductance between primary and secondary coil is 1 H. The peak e.m.f. induced in secondary coil is ______. (Frequency of a.c. = 50 Hz)


The mutual inductance between two coplanar concentric rings A and B of radii 'R1' and 'R2' placed in air when a current 'I' flows through ring A is (R1 >> R2) (µ0 = permeability of free space) ____________.


The mutual inductance between two coils is 0.09 henry. If the current in the primary coil changes from 0 to 20 A in 0.006 s, the e.m.f. induced in the secondary coil at that instant is ____________.


The mutual inductance of a pair of coils is 0.75 H. If current in the primary coil changes from 0.5 A to zero in 0.01 s, find average induced e.m.f. in secondary coil ______.


The mutual inductance between two coils depends on ______.

Mutual induction is the production of induced e.m.f. in a coil due to the changes of current in the ______.

If number of turns in primary and secondary coils is increased to two times each, the mutual inductance ______.


Two circular coils have their centres at the same point. The mutual inductance between them will be maximum when their axes ______


Two conducting circular loops of radii R1 and R2 are placed in the same plane with their centres coinciding. If R1 >> R2, the mutual inductance M between them will be directly proportional to ______.


The mutual inductance M12 of coil 1 with respect to coil 2 ______.

  1. increases when they are brought nearer.
  2. depends on the current passing through the coils.
  3. increases when one of them is rotated about an axis.
  4. is the same as M21 of coil 2 with respect to coil 1.

There are two coils A and B seperated by some distance. If a current of 2A flows through A, a magnetic flux of 10-2 Wb passes through B (no current through B). If no current passes through A and a current of 1A passes through B, what is the flux through A?


A toroid is a long coil of wire wound over a circular core. The major radius and cross-sectional radius of the toroid are R and r, respectively. The coefficient of mutual induction of the toroid is ______.

(The magnetic field in it is uniform, N = number of turns, R >> r, μ0 = permeability of free space)


Two circular loops, one of small radius r and the other of larger radius R, such that R >> r, are placed coaxially with centres coinciding. Obtain the mutual inductance of the arrangement.


Write the S.I. unit of mutual inductance.


The mutual inductance of a pair of adjacent coils is 1.5 H. If the current is one coil changes from 5 A to 10 A in 0.1 s, the rate of change of magnet flux linkage is ______.


State and define the SI unit of mutual inductance.


Two coils having self inductances L1 = 75 mH and L2 = 55 mH are coupled with each other. The coefficient of coupling (K) is 0. 75. Calculate the mutual inductance (M) of the two coils


Two planar concentric rings of metal wire having radii r and r2 (r₁ > r2) are placed in air. The current I is flowing through the coil of larger radius. The mutual inductance between the coils is given by ( μο = permeability of free space) ______.


Two coils are placed close to each other. The mutual inductance of the pair of coils depends upon ______.


The value of mutual inductance of two coils is 6 mH. The current in one of the coil changes from 6 A to 1 A in 0.2 second so that e.m.f. is induced in the other coil. If the resistance of the coil is 6 Ω, the value of induced charge passing through the coil is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×