Advertisements
Advertisements
Question
A tuning fork of frequency 440 Hz is attached to a long string of linear mass density 0⋅01 kg m−1 kept under a tension of 49 N. The fork produces transverse waves of amplitude 0⋅50 mm on the string. (a) Find the wave speed and the wavelength of the waves. (b) Find the maximum speed and acceleration of a particle of the string. (c) At what average rate is the tuning fork transmitting energy to the string?
Advertisements
Solution
Given,
Frequency of the tuning fork, f = 440 Hz
Linear mass density, m = 0.01 kgm−1
Applied tension, T = 49 N
Amplitude of the transverse wave produce by the fork = 0.50 mm
Let the wavelength of the wave be \[\lambda\]
(a) The speed of the transverse wave is given by \[\nu = \sqrt{\left( \frac{T}{m} \right)}\]
\[\Rightarrow v = \sqrt{\frac{49}{0 . 01}} = 70 m/s\]
\[Also, \]
\[\nu = \frac{f}{\lambda}\]
\[ \therefore \lambda = \frac{f}{v} = \frac{70}{440} = 16 cm\]
(b) Maximum speed (vmax) and maximum acceleration (amax):
We have:
\[y = A \sin \left( \omega t - kx \right)\]
\[\therefore \nu = \frac{dy}{dt} = A\omega \cos \left( \omega t - kx \right)\]
\[Now, \]
\[ \nu_\max = \left( \frac{dy}{dt} \right) = A\omega\]
\[ = 0 . 50 \times {10}^{- 3} \times 2\pi \times 440\]
\[ = 1 . 3816 m/s . \]
\[And, \]
\[a = \frac{d^2 y}{d t^2}\]
\[ \Rightarrow a = - A \omega^2 \sin \left( \omega t - kx \right)\]
\[ a_\max = - A \omega^2 \]
\[ = 0 . 50 \times {10}^{- 3} \times 4 \pi^2 \left( 440 \right)^2 \]
\[= 3 . 8 km/ s^2\]
(c) Average rate (p) is given by
\[p = 2 \pi^2 \nu A^2 f^2 \]
\[ = 2 \times 10 \times 0 . 01 \times 70 \times \left( 0 . 5 \times {10}^{- 3} \right)^2 \times \left( 440 \right)^2 \]
\[ = 0 . 67 W\]
APPEARS IN
RELATED QUESTIONS
When longitudinal wave is incident at the boundary of denser medium, then............................
- compression reflects as a compression.
- compression reflects as a rarefaction.
- rarefaction reflects as a compression.
- longitudinal wave reflects as transverse wave.
When a transverse wave on a string is reflected from the free end, the phase change produced is ..............
(a) zero rad
(b) ` pi/2 ` rad
(c) `(3pi)/4` rad
(d) `pi` rad
A wire of density ‘ρ’ and Young’s modulus ‘Y’ is stretched between two rigid supports separated by a distance ‘L’ under tension ‘T’. Derive an expression for its frequency in fundamental mode. Hence show that `n=1/(2L)sqrt((Yl)/(rhoL))` where symbols have their usual meanings
A transverse harmonic wave on a string is described by y(x, t) = 3.0 sin (36 t + 0.018 x + π/4)
Where x and y are in cm and t in s. The positive direction of x is from left to right.
(a) Is this a travelling wave or a stationary wave?
If it is travelling, what are the speed and direction of its propagation?
(b) What are its amplitude and frequency?
(c) What is the initial phase at the origin?
(d) What is the least distance between two successive crests in the wave?
Given below are some functions of x and t to represent the displacement (transverse or longitudinal) of an elastic wave. State which of these represent (i) a traveling wave, (ii) a stationary wave or (iii) none at all:
y = cos x sin t + cos 2x sin 2t
Explain why (or how) The shape of a pulse gets distorted during propagation in a dispersive medium.
A transverse wave is produced on a stretched string 0.9 m long and fixed at its ends. Find the speed of the transverse wave, when the string vibrates while emitting the second overtone of frequency 324 Hz.
A mechanical wave propagates in a medium along the X-axis. The particles of the medium
(a) must move on the X-axis
(b) must move on the Y-axis
(c) may move on the X-axis
(d) may move on the Y-axis.
A transverse wave travels along the Z-axis. The particles of the medium must move
A wave going in a solid
(a) must be longitudinal
(b) may be longitudinal
(c) must be transverse
(d) may be transverse.
A wave moving in a gas
A particle on a stretched string supporting a travelling wave, takes 5⋅0 ms to move from its mean position to the extreme position. The distance between two consecutive particles, which are at their mean positions, is 2⋅0 cm. Find the frequency, the wavelength and the wave speed.
Two wires of different densities but same area of cross section are soldered together at one end and are stretched to a tension T. The velocity of a transverse wave in the first wire is double of that in the second wire. Find the ratio of the density of the first wire to that of the second wire.
A circular loop of string rotates about its axis on a frictionless horizontal place at a uniform rate so that the tangential speed of any particle of the string is ν. If a small transverse disturbance is produced at a point of the loop, with what speed (relative to the string) will this disturbance travel on the string?
A 660 Hz tuning fork sets up vibration in a string clamped at both ends. The wave speed for a transverse wave on this string is 220 m s−1 and the string vibrates in three loops. (a) Find the length of the string. (b) If the maximum amplitude of a particle is 0⋅5 cm, write a suitable equation describing the motion.
Three resonant frequencies of a string are 90, 150 and 210 Hz. (a) Find the highest possible fundamental frequency of vibration of this string. (b) Which harmonics of the fundamental are the given frequencies? (c) Which overtones are these frequencies? (d) If the length of the string is 80 cm, what would be the speed of a transverse wave on this string?
The equation of a standing wave, produced on a string fixed at both ends, is
\[y = \left( 0 \cdot 4 cm \right) \sin \left[ \left( 0 \cdot 314 {cm}^{- 1} \right) x \right] \cos \left[ \left( 600\pi s^{- 1} \right) t \right]\]
What could be the smallest length of the string?
Given below are some functions of x and t to represent the displacement (transverse or longitudinal) of an elastic wave. State which of these represent (i) a traveling wave, (ii) a stationary wave or (iii) none at all:
`"y" = 2sqrt(x - "vt")`
