Advertisements
Advertisements
प्रश्न
How does the heat H produced by a current passing through a fixed resistance wire depend on magnitude of current I?
Advertisements
उत्तर
Heat produced by a current passing through a wire with a fixed resistance depends on the square of current, I.
Heat, H = I2 x R x t
APPEARS IN
संबंधित प्रश्न
The atoms of copper contain electrons and the atoms of rubber also contain electrons. Then why does copper conduct electricity but rubber does not conduct electricity?
By what name is the physical quantity coulomb/second called?
Draw a circuit diagram to show how two 4 V electric lamps can be lit brightly from two 2 V cells.
The lamps in a house hold circuit are connected in parallel because:
(a) this way they required less current
(b) if one lamp fails the others remain lit
(c) this way they require less power
(d) if one lamp fails the other also fail
How do you think the brightness of two lamps arranged in parallel compares with the brightness of two lamps arranged in series (both arrangements having one cell)?
The rating of a fuse connected in the lighting circuit is ______.
A switch must be connected in ______.
Match the pairs.
| ‘A’ Group | ‘B’ Group |
| 1. Free electrons | a. V/R |
| 2. Current | b. Increases the resistance in the circuit |
| 3. Resistivity | c. Weakly attached |
| 4. Resistances in series | d. VA/LI |
Two cells each having an e.m.f. of 2 V and an internal resistance of \(2,\Omega\) are connected in series as shown in Fig. What is the current flowing through the circuit in each case?
If a fuse contains a 5 A fuse wire and the voltage is 240 V, what is the maximum power (wattage) which may be taken from the circuit?
Three heaters each rated 250 W, 100 V are connected in parallel to a 100 V supply of the energy supplied in kWh to the three heaters in 5 hours.
State the conditions for the flow of charge in a circuit from one point to the other.
- What is meant by electric current?
- Name and define its unit.
- Which instrument is used to measure the electric current? How should it be connected in a circuit?
In semiconductors, the charge carriers are:
In the process of current flow through a conductor, the amount of charge passing per unit time gives:
