Advertisements
Advertisements
प्रश्न
- Assertion (A): Putting the p-type semiconductor slab directly in physical contact with the n-type semiconductor slab cannot form the pn junction.
- Reason (R): The roughness at contact will be much more than inter atomic crystal spacing and continuous flow of charge carriers is not possible.
पर्याय
If both Assertion and Reason are true and Reason is the correct explanation of Assertion.
If both Assertion and Reason are true but Reason is not the correct explanation of Assertion.
If Assertion is true but Reason is false.
If both Assertion and Reason are false.
Advertisements
उत्तर
If both Assertion and Reason are true and Reason is the correct explanation of Assertion.
Explanation:
A pn junction cannot be formed by physically contacting a p-type semiconductor slab with an n-type semiconductor slab. The roughness upon contact does not match the inter-atomic crystal spacing of about 2-3 Å, resulting in a discontinuity. As a result, a continuous flow of charge carriers is impossible. So both the statement and the reason are correct, and the reason explains the assertion.
APPEARS IN
संबंधित प्रश्न
In a p-type semiconductos, which of the following statement is true:
The number of silicon atoms per m3 is 5 × 1028. This is doped simultaneously with 5 × 1022 atoms per m3 of Arsenic and 5 × 1020 per m3 atoms of Indium. Calculate the number of electrons and holes. Given that ni= 1.5 × 1016 m−3. Is the material n-type or p-type?
Distinguish between intrinsic and extrinsic semiconductor. (Give any two points).
A donor impurity results in ______.
When p-n junction diode is forward biased, then ______.
Explain the following term:
Extrinsic semiconductor
In a pure semiconductor crystal of Si, if antimony is added then what type of extrinsic semiconductor is obtained. Draw the energy band diagram of this extrinsic semiconductor so formed.
Suppose a ‘n’-type wafer is created by doping Si crystal having 5 × 1028 atoms/m3 with 1 ppm concentration of As. On the surface 200 ppm Boron is added to create ‘P’ region in this wafer. Considering n i = 1.5 × 1016 m–3, (i) Calculate the densities of the charge carriers in the n and p regions. (ii) Comment which charge carriers would contribute largely for the reverse saturation current when diode is reverse biased.
The figure shows a piece of pure semiconductor S in series with a variable resistor R and a source of constant voltage V. Should the value of R be increased or decreased to keep the reading of the ammeter constant, when semiconductor S is heated? Justify your answer
- Statement I: By doping silicon semiconductor with pentavalent material, the electrons density increases.
- Statement II: The n-type semiconductor has net negative charge. In the light of the above statements, choose the most appropriate answer from the options given below:
