हिंदी

In a common-base connection, the emitter current is 6.28 mA and the collector current is 6.20 mA. Determine the common-base DC current gain.

Advertisements
Advertisements

प्रश्न

In a common-base connection, the emitter current is 6.28 mA and the collector current is 6.20 mA. Determine the common-base DC current gain.

संख्यात्मक
Advertisements

उत्तर

Data: The emitter current is IE = 6.28 mA.

The collector current is IC = 6.20 mA

`alpha_(dc) = I_C/I_E` 

⇒ `alpha = 6.20/6.28`

⇒ `alpha = 0.987`

The common base DC current gain is 0.987.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 16: Semiconductor Devices - Exercises [पृष्ठ ३६४]

APPEARS IN

बालभारती Physics [English] Standard 12 Maharashtra State Board
अध्याय 16 Semiconductor Devices
Exercises | Q 20 | पृष्ठ ३६४

संबंधित प्रश्न

In a BJT, the largest current flow occurs ______.


In a common-base connection, a certain transistor has an emitter current of 10mA and a collector current of 9.8 mA. Calculate the value of the base current.


Derive the relation between α and β.


Which method of biasing is used for operating a transistor as an amplifier?


For a transistor β =75 and IE = 7.5 mA. The value of α is ______ 


Draw the circuit symbol for NPN and PNP transistors. What is the difference in the Emitter, Base, and Collector regions of a transistor? 


Assuming VCEsat = 0.2 V and β = 50, find the minimum base current (IB) required to drive the transistor given in the figure to saturation.


A transistor of α = 0.99 and VBE = 0.7 V is connected in the common-emitter configuration as shown in the figure. If the transistor is in the saturation region, find the value of collector current.


A transistor has a voltage gain A. If the amount βA of its output is applied to the input of the transistor, then the transistor becomes oscillator, when ______.


For a transistor, the current ratio 'βdc' is defined as the ratio of ______.


In switching circuit, transistor is in ON state. Values of Iand IB are 5.2 mA and 10 µA respectively and value of RC is 1 k`Omega`. If Vcc is at 5.5 V, then VCE is ______.


In an npn transistor, the base current is 100 µA and the collector current is 10 mA. The emitter current is ______.


In an npn transistor, the collector current is 24 mA. If 80% of electrons reach collector, its base current in mA is ______.


In a transistor, a change of 8.0 mA in the emitter current produces a change of 7.8 mA in the collector current. Then change in the base current is ____________.


A pnp transistor is used in common-emitter mode. If a change of 40 µA in base current brings a change of 2 µA in collector current with 0.04 V in base-emitter voltage, then the input resistance is ____________.


In the case of transistor, the relation between current ratios αdc and βdc is ______.


A change of 9.0 mA in the emitter current brings a change of 8.9 mA in the collector current. The value of current gain β will be ______.


For an ideal diode, the current in the following arrangement is ______.


In a study of transistor as an amplifier, the ratio of collector current to emitter current is 0.98. The collector current is 3mA, then base current will be approximately ______.


A transistor having α = 0.8 is connected in a common emitter configuration. When the base current changes by 6 mA, the change in collector current is ______ 


The reverse bias in a junction diode is changed from 8V to 13V, then the value of the current changes from 40μA to 60μA. The resistance of junction diode will be ______.


A common emitter amplifier circuit built using an n-p-n transistor is shown in the figure. Its DC current gain is 300, RC = 4 kΩ and VCC = 20 V. What is the minimum base current for VCE to reach saturation?

 


In a CE amplifier, the current gain is 80 and the emitter current is 9 mA. The base current is ______.


Define α.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×