हिंदी

Find equivalent capacitance between A and B in the combination given below. Each capacitor is of 2 µF capacitance. - Physics

Advertisements
Advertisements

प्रश्न

(i) Find equivalent capacitance between A and B in the combination given below. Each capacitor is of 2 µF capacitance.

(ii) If a dc source of 7 V is connected across AB, how much charge is drawn from the source and what is the energy stored in the network? 

Advertisements

उत्तर

(i)

`1/C_(eqv)=1/2+1/6+1/2=7/6`

`C_(eqv)=6/7 μF`

(ii) `Q=C_(eqv)V`

`Q=6/7×7`

`Q=6 " μC"`

`E=1/2CV^2`

`E=1/2×6/7×(49)`

`E=21 J`

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2016-2017 (March) Delhi Set 1

वीडियो ट्यूटोरियलVIEW ALL [2]

संबंधित प्रश्न

When an AC source is connected to an ideal capacitor, show that the average power supplied by the source over a complete cycle is zero


Find the equivalent capacitance of the network shown in the figure, when each capacitor is of 1 μF. When the ends X and Y are connected to a 6 V battery, find out (i) the charge and (ii) the energy stored in the network.


Find the charge appearing on each of the three capacitors shown in figure .


An air-filled parallel-plate capacitor is to be constructed which can store 12 µC of charge when operated at 1200 V. What can be the minimum plate area of the capacitor? The dielectric strength of air is `3 xx 10^6  "Vm"^-1`


Figure shows two parallel plate capacitors with fixed plates and connected to two batteries. The separation between the plates is the same for the two capacitors. The plates are rectangular in shape with width b and lengths l1 and l2. The left half of the dielectric slab has a dielectric constant K1 and the right half K2. Neglecting any friction, find the ration of the emf of the left battery to that of the right battery for which the dielectric slab may remain in equilibrium.


If the voltage applied on a capacitor is increased from V to 2V, choose the correct conclusion.


The positive terminal of 12 V battery is connected to the ground. Then the negative terminal will be at ______.


For changing the capacitance of a given parallel plate capacitor, a dielectric material of dielectric constant K is used, which has the same area as the plates of the capacitor.

The thickness of the dielectric slab is `3/4`d, where 'd' is the separation between the plate of the parallel plate capacitor.

The new capacitance (C') in terms of the original capacitance (C0) is given by the following relation:


A 5µF capacitor is charged fully by a 220 V supply. It is then disconnected from the supply and is connected in series to another uncharged 2.5 µF capacitor If the energy change during the charge redistribution is `"X"/100`J then value of X to the 100 nearest integer is ______.


Two plates A and B of a parallel plate capacitor are arranged in such a way, that the area of each plate is S = 5 × 10-3 m 2 and distance between them is d = 8.85 mm. Plate A has a positive charge q1 = 10-10 C and Plate B has charge q2 = + 2 × 10-10 C. Then the charge induced on the plate B due to the plate A be - (....... × 10-11 )C


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×