(English Medium) ICSE Class 10 - CISCE Question Bank Solutions for Physics

Complete the following nuclear change:

\[\ce {^238_92 P  \text ->[α] Q \text ->[β] R \text ->[β] S}\]

Complete the following nuclear change:

\[\ce {^A_Z X \text ->[α] X_1 \text ->[γ] X_2 \text ->[2β] X_3}\]

Complete the following nuclear changes:

\[\ce {X \text ->[β] X_1 \text ->[α] X_2 \text ->[α] ^172_69 X_3}\]

A coil has a self-inductance of 0·05 Henry. Find the magnitude of the emf induced in it when the current flowing through it is changing at the rate of 100 As^-1.

What is an electromagnet?

What is the colour code for the insulation on the earth wire?

A cell of emf. 1.5 V and internal resistance 10 ohms is connected to a resistor of 5 ohms, with an ammeter in series see fig.. What is the reading of the ammeter?

Four cells, each of e.m.f. 1.5 V and internal resistance 2.0 ohms are connected in parallel. The battery of cells is connected to an external resistance of 2.5 ohms. Calculate:

(i) The total resistance of the circuit.
(ii) The current flowing in the external circuit.
(iii) The drop in potential across-the terminals of the cells.

Define the e.m.f. (E) of a cell and the potential difference (V) of a resistor R in terms of the work done in moving a unit charge. State the relation between these two works and the work done in moving a unit charge through a cell connected across the resistor. Take the internal resistance of the cell as ‘r’. Hence obtain an expression for the current i in the circuit.

A battery of 4 cell, each of e.m.f. 1.5 volt and internal resistance 0.5 Ω is connected to three resistances as shown in the figure. Calculate:
(i) The total resistance of the circuit.
(ii) The current through the cell.
(iii) The current through each resistance.
(iv) The p.d. across each resistance.

Four cells each of e.m.f. 2V and internal resistance 0.1 Ω are connected in series to an ammeter of negligible resistance, a 1.6 Ω resistor and an unknown resistor R₁. The current in the circuit is 2A. Draw a labelled diagram and calculate:

(i) Total resistance of the circuit,
(ii) Total e.m.f.
(iii) The value of R₁ and
(iv) The p.d. across R₁.

A cell supplies a current of 0.6 A through a 2Ω coil and a current of 0.3 A through on 8Ω coil. Calculate the e.m.f and internal resistance of the cell.

When a resistance of 3Ω is connected across a cell, the current flowing is 0.5 A. On changing the resistance to 7Ω, the current becomes 0.25A. Calculate the e.m.f. and the internal resistance of the cell.

What precaution do you observe while connecting a plug top into a socket?

Name two precautions to be observed while using an immersion heater.

List some of the practical applications of an electromagnet.

Why soft iron is preferred to be used as the core of the electromagnet of an electric bell?

What is an electromagnet? What do you know about the simplest form of an electromagnet?

Draw a labelled diagram to make an electromagnet from a soft iron bar. Mark the polarity at its ends in your diagram. What precaution would you observe while making it?

You have been provided with a solenoid AB.

(i) What is the polarity at end A?
(ii) Give one advantage of an electromagnet over a permanent magnet.