Advertisements
Advertisements
Question
Write the functions of the following in communication systems:
Transducer
Advertisements
Solution
Transducer: A transducer is used to convert a non-electrical signal like a voice signal into electrical form before sending it as an input to a transmitter.
APPEARS IN
RELATED QUESTIONS
What is the function of a 'Repeater' used in communication system?
Write the functions of the following in communication systems:
Modulator
Write the functions of the following in communication systems:
Demodulator
Write the function of receiver in communication system.
Write the functions of the transducer and repeaters.
A 1 KW signal is transmitted using a communication channel which provides attenuation at the rate of – 2dB per km. If the communication channel has a total length of 5 km, the power of the signal received is `["gain in dB" = 10 log ("P"_0/"P"_"i")]`
A basic communication system consists of ______.
- transmitter.
- information source.
- user of information.
- channel.
- receiver.
Choose the correct sequence in which these are arranged in a basic communication system:
Which of the following would produce analog signals and which would produce digital signals?
- A vibrating tuning fork.
- Musical sound due to a vibrating sitar string.
- Light pulse.
- Output of NAND gate.
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
