Advertisements
Advertisements
Question
Write the functions of the following in communication systems:
Modulator
Advertisements
Solution
Modulator: Modulator modulates the message signal, i.e. it superimposes a low-frequency message signal on a high frequency carrier wave, so that the low-frequency message signal can be transmitted over long distances.
APPEARS IN
RELATED QUESTIONS
Write the functions of the following in communication systems:
Demodulator
Explain the term demodulation used in a communication system.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Write the function of receiver in communication system.
Write the functions of the transducer and repeaters.
A 1 KW signal is transmitted using a communication channel which provides attenuation at the rate of – 2dB per km. If the communication channel has a total length of 5 km, the power of the signal received is `["gain in dB" = 10 log ("P"_0/"P"_"i")]`
A basic communication system consists of ______.
- transmitter.
- information source.
- user of information.
- channel.
- receiver.
Choose the correct sequence in which these are arranged in a basic communication system:
Audio sine waves of 3 kHz frequency are used to amplitude modulate a carrier signal of 1.5 MHz. Which of the following statements are true?
- The sideband frequencies are 1506 kHz and 1494 kHz.
- The bandwidth required for amplitude modulation is 6 kHz.
- The bandwidth required for amplitude modulation is 3 MHz.
- The side band frequencies are 1503 kHz and 1497 kHz.
Which of the following would produce analog signals and which would produce digital signals?
- A vibrating tuning fork.
- Musical sound due to a vibrating sitar string.
- Light pulse.
- Output of NAND gate.
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
