Advertisements
Advertisements
Question
A basic communication system consists of ______.
- transmitter.
- information source.
- user of information.
- channel.
- receiver.
Choose the correct sequence in which these are arranged in a basic communication system:
Options
ABCDE.
BADEC.
BDACE.
BEADC.
Advertisements
Solution
A basic communication system consists of BADEC.
Explanation:
A basic communication system consists of an information source, a transmitter, a link (channel) and a receiver or a communication system is a set-up used in the transmission and reception of information from one place to another.
The whole system consists of several elements in a sequence. It can be represented in the diagram given below:
APPEARS IN
RELATED QUESTIONS
Explain the terms : Transmitter in communication system
What is the function of a 'Repeater' used in communication system?
Write the functions of the following in communication systems:
Transducer
Write the functions of the following in communication systems:
Demodulator
Explain the term demodulation used in a communication system.
Distinguish between broadcast mode and point-to-point mode of communication and give one example for each.
A device X used in communication system can convert one form of energy into another. Name the device X. Explain the function of a repeater in a communication system.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Explain the basic concept of mobile telephoning ?
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Write the function of receiver in communication system.
A 1 KW signal is transmitted using a communication channel which provides attenuation at the rate of – 2dB per km. If the communication channel has a total length of 5 km, the power of the signal received is `["gain in dB" = 10 log ("P"_0/"P"_"i")]`
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
