Advertisements
Advertisements
प्रश्न
A basic communication system consists of ______.
- transmitter.
- information source.
- user of information.
- channel.
- receiver.
Choose the correct sequence in which these are arranged in a basic communication system:
पर्याय
ABCDE.
BADEC.
BDACE.
BEADC.
Advertisements
उत्तर
A basic communication system consists of BADEC.
Explanation:
A basic communication system consists of an information source, a transmitter, a link (channel) and a receiver or a communication system is a set-up used in the transmission and reception of information from one place to another.
The whole system consists of several elements in a sequence. It can be represented in the diagram given below:
APPEARS IN
संबंधित प्रश्न
Explain the terms : Transmitter in communication system
What is the function of a 'Repeater' used in communication system?
Write the functions of the following in communication systems:
Transmitter
Write the functions of the following in communication systems:
Modulator
Write the functions of the following in communication systems:
Transducer
Write the functions of the following in communication systems:
Receiver
Explain the term demodulation used in a communication system.
Distinguish between broadcast mode and point-to-point mode of communication and give one example for each.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Explain the basic concept of mobile telephoning ?
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Write the function of receiver in communication system.
Write the functions of the transducer and repeaters.
A 1 KW signal is transmitted using a communication channel which provides attenuation at the rate of – 2dB per km. If the communication channel has a total length of 5 km, the power of the signal received is `["gain in dB" = 10 log ("P"_0/"P"_"i")]`
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
