Advertisements
Advertisements
प्रश्न
A 1 KW signal is transmitted using a communication channel which provides attenuation at the rate of – 2dB per km. If the communication channel has a total length of 5 km, the power of the signal received is `["gain in dB" = 10 log ("P"_0/"P"_"i")]`
पर्याय
900 W
100 W
990 W
1010 W
Advertisements
उत्तर
100 W
Explanation:
Power of the signal transmitted is Pi = 1 KW = 1000 W
rate of attenuation of signal is = `-2("dB"/"km")`
Length or total path = 5 km
thus less suffered in the communication channel = (5) (– 2) = – 10 dB and gain in
dB = 10 log `("P"_0/"P"_"i")`
dB = – 10 log `("P"_"i"/"P"_0)`
– 10 = – 10 log `("P"_"i"/"P"_0)`
log' `("P"_"i"/"P"_0) = 1 ("P"_"i"/"P"_0) = 10`
P0 = `("P"_"i"/"P"_0) = 1000/10` = 100 W
APPEARS IN
संबंधित प्रश्न
What is the function of a 'Repeater' used in communication system?
Write the functions of the following in communication systems:
Transmitter
Write the functions of the following in communication systems:
Modulator
Write the functions of the following in communication systems:
Transducer
Write the functions of the following in communication systems:
Receiver
Write the functions of the following in communication systems:
Demodulator
Distinguish between broadcast mode and point-to-point mode of communication and give one example for each.
A device X used in communication system can convert one form of energy into another. Name the device X. Explain the function of a repeater in a communication system.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Explain the basic concept of mobile telephoning ?
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Write the function of receiver in communication system.
Write the functions of the transducer and repeaters.
Which of the following would produce analog signals and which would produce digital signals?
- A vibrating tuning fork.
- Musical sound due to a vibrating sitar string.
- Light pulse.
- Output of NAND gate.
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
