Advertisements
Advertisements
प्रश्न
Write the functions of the transducer and repeaters.
Advertisements
उत्तर
The function of a transducer is to convert one form of energy into another form. A microphone at the transmitting station is one of the examples of a transducer.
The function of a repeater is to regenerate the signal which can be transmitted forward. A repeater is a combination of a receiver, amplifier, and a transmitter. A repeater receives the signal, amplifies it and then retransmits it forward.
APPEARS IN
संबंधित प्रश्न
Explain the terms Attenuation used in Communication System.
Distinguish between broadcast mode and point-to-point mode of communication and give one example for each.
A device X used in communication system can convert one form of energy into another. Name the device X. Explain the function of a repeater in a communication system.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Write the function of receiver in communication system.
What is the function of a bandpass filter used in a modulator for obtaining AM signal?
Which of the following would produce analog signals and which would produce digital signals?
- A vibrating tuning fork.
- Musical sound due to a vibrating sitar string.
- Light pulse.
- Output of NAND gate.
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
