Advertisements
Advertisements
प्रश्न
Write the functions of the transducer and repeaters.
Advertisements
उत्तर
The function of a transducer is to convert one form of energy into another form. A microphone at the transmitting station is one of the examples of a transducer.
The function of a repeater is to regenerate the signal which can be transmitted forward. A repeater is a combination of a receiver, amplifier, and a transmitter. A repeater receives the signal, amplifies it and then retransmits it forward.
APPEARS IN
संबंधित प्रश्न
What is the function of a 'Repeater' used in communication system?
Write the functions of the following in communication systems:
Transmitter
Write the functions of the following in communication systems:
Demodulator
Explain the term demodulation used in a communication system.
Distinguish between broadcast mode and point-to-point mode of communication and give one example for each.
A device X used in communication system can convert one form of energy into another. Name the device X. Explain the function of a repeater in a communication system.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Explain the basic concept of mobile telephoning ?
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
