Advertisements
Advertisements
Question
Why is soft iron used as the core of the electromagnet in an electric bell?
Advertisements
Solution
The soft iron bar acquires the magnetic properties only when an electric current flows through the solenoid and loses the magnetic properties as the current is switched off. Hence, soft iron is used as the core of the electromagnet in an electric bell.
APPEARS IN
RELATED QUESTIONS
Why is soft iron used as the core of the electromagnet in an electric bell?
Electromagnets are made up of :
The strength of the electromagnet can be increased by
How is an electromagnet made? Name two factors on which the strength of magnetic field of the electromagnet depends.
You are required to make an electromagnet from a soft iron bar by using a cell, an insulated coil of copper wire and a switch.
- Draw a circuit diagram to represent the process.
- Label the poles of the electromagnet.
The following figure shows a coil wound around a soft iron bar XY.
- State the polarity at the ends X and Y as the switch is pressed.
- Suggest one way of increasing the strength of electromagnet so formed.
Show with the aid of a diagram how a wire is wound on a U-shaped piece of soft iron in order to make it an electromagnet. Complete the circuit diagram and label the poles of the electromagnet.
State two ways through which the strength of an electromagnet can be increased.
Name one device that uses an electromagnet.
State two advantages of an electromagnet over a permanent magnet.
How is the working of an electric bell affected, if alternating current be used instead of direct current?
Name the material used for making the armature of an electric bell. Give a reason for your answer.
Unlike magnetic poles ______ whereas like poles ______.
Assertion (A): When 2 long parallel wires, hanging freely are connected in parallel to a battery, they come closer to each other.
Reason (R): Wires carrying current in opposite directions repel each other.
Explain the working of the following device.
Speaker
