Advertisements
Advertisements
Question
The resistance of an iron wire and a copper wire at 20°C are 3.9 Ω and 4.1 Ω, respectively. At what temperature will the resistance be equal? Temperature coefficient of resistivity for iron is 5.0 × 10–3 K–1 and for copper, it is 4.0 × 10–3 K–1. Neglect any thermal expansion.
Advertisements
Solution
Given:-
Resistance RFe of the iron wire at 20°C = 3.9 Ω
Resistance RCu of the copper wire at 20°C = 4.1 Ω
Temperature coefficient αFe for iron = 5.0 × 10–3 K–1
Temperature coefficient αCu for copper = 4.0 × 10–3 K–1
Let
The temperature at which the resistance be equal = T
Resistance of iron wire at T °C = RFe'
Resistance of copper wire at T °C = RCu'
We know:-
\[R = R_0 (1 + \alpha ∆ T)\]
Here, ΔT = T - 20
\[\Rightarrow R_{Fe} ' = R_{Fe} \left[ 1 + \alpha_{Fe} \left( T - 20 \right) \right]\]
\[ R_{Cu} ' = R_{Cu} \left[ 1 + \alpha_{Cu} \left( T - 20 \right) \right]\]
\[ R_{Fe} ' = R_{Cu} '\]
\[ \Rightarrow R_{Fe} \left[ 1 + \alpha_{Fe} \left( T - 20 \right) \right] = R_{Cu} \left[ 1 + \alpha_{Cu} \left( T - 20 \right) \right]\]
\[ \Rightarrow 3 . 9 \left[ 1 + 5 \times {10}^{- 3} \left( T - 20 \right) \right] = 4 . 1 \left[ 1 + 4 \times {10}^{- 3} \left( T - 20 \right) \right]\]
\[ \Rightarrow 3 . 9 + 3 . 9 \times 5 \times {10}^{- 3} \left( T - 20 \right) = 4 . 1 + 4 . 1 \times 4 \times {10}^{- 3} \left( T - 20 \right)\]
\[ \Rightarrow 4 . 1 \times 4 \times {10}^{- 3} \left( T - 20 \right) - 3 . 9 \times 5 \times {10}^{- 3} \left( T - 20 \right) = - 4 . 1 + 3 . 9\]
\[ \Rightarrow 16 . 4 \left( T - 20 \right) - 19 . 5 \left( T - 20 \right) = - 0 . 2 \times {10}^3 \]
\[ \Rightarrow \left( T - 20 \right)\left( - 3 . 1 \right) = - 0 . 2 \times {10}^3 \]
\[ \Rightarrow T - 20 = 64 . 5\]
\[ \Rightarrow T = 84 . 5^\circ K\]
APPEARS IN
RELATED QUESTIONS
A silver wire has a resistance of 2.1 Ω at 27.5°C, and a resistance of 2.7 Ω at 100°C. Determine the temperature coefficient of resistivity of silver.
The order of coloured rings in a carbon resistor is red, yellow, blue and silver. The resistance of the
carbon resistor is:
a) 24 x 106 Ω ± 5%
b) 24 x 106 Ω ± 10%
c) 34 x 104 Ω ± 10%
d) 26 x 104 Ω ± 5%
Consider a circuit containing an ideal battery connected to a resistor. Do "work done by the battery" and "the thermal energy developed" represent two names of the same physical quantity?
A non-ideal battery is connected to a resistor. Is work done by the battery equal to the thermal energy developed in the resistor? Will your answer change if the battery is ideal?
Sometimes it is said that "heat is developed" in a resistance when there is an electric current in it. Recall that heat is defined as the energy being transferred due to temperature difference. Is the statement in quotes technically correct?
As the temperature of a metallic resistor is increased, the product of its resistivity and conductivity ____________ .
When a current passes through a resistor, its temperature increases. Is it an adiabatic process?
As temperature increases, the viscosity of liquids decreases considerably. Will this decrease the resistance of an electrolyte as the temperature increases?
Consider the following statements regarding a thermocouple.
(A) The neutral temperature does not depend on the temperature of the cold junction.
(B) The inversion temperature does not depend on the temperature of the cold junction.
An electric kettle used to prepare tea, takes 2 minutes to boil 4 cups of water (1 cup contains 200 cc of water) if the room temperature is 25°C. (a) If the cost of power consumption is Re 1.00 per unit (1 unit = 1000 watt-hour), calculate the cost of boiling 4 cups of water. (b) What will be the corresponding cost if the room temperature drops to 5°C?
The 2.0 Ω resistor shown in the figure is dipped into a calorimeter containing water. The heat capacity of the calorimeter together with water is 2000 J K−1. (a) If the circuit is active for 15 minutes, what would be the rise in the temperature of the water? (b) Suppose the 6.0 Ω resistor gets burnt. What would be the rise in the temperature of the water in the next 15 minutes?

A carbon resistor has coloured bands as shown in Figure 2 below. The resistance of the resistor is:

figure 2
Define temperature coefficient of resistance of the material of a conductor.
A variable resistor R is connected across a cell of emf ε and internal resistance r as shown in the figure. Draw a plot showing the variation of
(i) Terminal voltage V and
(ii) the current I, as a function of R.

The higher and lower fixed points on a thermometer are separated by 160 mm. When the length of the mercury thread above the lower point is 40 mm, the temperature reading would be :
The temperature (T) dependence of resistivity of materials A and material B is represented by fig (i) and fig (ii) respectively. Identify material A and material B.
![]() fig. (i) |
![]() fig. (ii) |


