Advertisements
Advertisements
Question
The primary coil of a transformed has 800 urns and the secondary coil has 8 turns. It is connected to a 220 V a.c. supply. What will be the output voltage?
Advertisements
Solution
No. of turns in primary coil Np =800
No. of turns in secondary coil Np=8.
Input supply voltage Ep = 220 V.
`E_p/E_s = N_p / N_s`
`E_s = (N_sxx E_p)/N_p = (8 xx 220)/ 800`
`E_s = 2.2 V.`
RELATED QUESTIONS
You are required to make an electromagnet from a soft iron bar by using a cell, an insulated coil of copper wire and a switch. (a) Draw a circuit diagram to represent the process. (b) label the poles of the electromagnet.
The following diagram in Fig. 10.44 shows a coil X connected to a sensitive centre –zero galvanometer G and a coil P connected to a battery through a switch S.
(a) Describe the observation when the switch S is (i) closed suddenly, (ii) then kept closed, (iii) finally opened.
(b) Name and state the law which explains the above observations.
The input and output voltage of a transformer are 220 V and 44 V respectively. Find: the turns ratio.
A transformer works on the principle of ______.
A transformer is essentially an a.c. device. It cannot work on d.c. It changes alternating voltages or currents. It does not affect the frequency of a.c. It is based on the phenomenon of mutual induction. A transformer essentially consists of two coils of insulated copper wire having different numbers of turns and wound on the same soft iron core.
The number of turns in the primary and secondary coils of an ideal transformer is 2000 and 50 respectively. The primary coil is connected to a main supply of 120 V and secondary coil is connected to a bulb of resistance 0.6 Ω.
Power in primary coil is ______.
Draw the effective equivalent circuit of the circuit shown in figure, at very high frequencies and find the effective impedance.
Two coils P and Q are kept near each other. When no current flows through coil P and current increase in coil Q at the rate 10A/s, the emf in coil P is 15mV. When coil Q carries no current and current of 1. 8A flows through coil P, the magnetic flux linked with the coil Q is ______.
Which winding is the output coil connected to the load?
