Advertisements
Advertisements
Question
Name two gases which are filled in filament type electric light bulbs.
Advertisements
Solution
Two gases that are filled in the filament type of electric bulbs are:
(i) argon
(ii) nitrogen
APPEARS IN
RELATED QUESTIONS
Define Electric power.
Name two safety devices which are connected to the live wire of a household electric circuit
Two lamps, one rated 220 V, 50 W and the other rated 220 V, 100 W, are connected in serieswith mains of 220 V. Explain why does the 50 W lamp consume more power
The coil of an electric bulb takes 40 watts to start glowing. If more than 40 W are supplied, 60% of the extra power is converted into light and the remaining into heat. The bulb consumes 100 W at 220 V. Find the percentage drop in the light intensity at a point if the supply voltage changes from 220 V to 200 V.
A simple electric circuit has 24 V battery and a resistor of 60 Ω. What will be the current in the circuit? The resistance of the connecting wires is negligible.
The diagram 31 shows a 3 terminal plug socket.
(i) What is the purpose of the terminal E?
(ii) To which part of the appliance is the terminal E connected?
(iii) To which wire L or N, is the fuse connected and why?
Express watt hour and kilowatt hour in joule.
Why is heating coil wound in the form of a helix in electric stove?
Why is heating element wound on a long porcelain rod in a room heater.
Two electric lamps each rating 100 W, 110 V are connected in series to a 220 V power supply and two other electric lamps each of marking 100 W, 220 V are connected in parallel to the same power supply. Will anyone of the two combinations give more light than the other? Give a reason for your answer.
Why is the electric power from the generating station transmitted at high voltage?
You are required to connect a bulb, a fan and a socket outlet to the mains in one set A and an air-conditioner and a refrigerator to the mains in other set B. Will you recommend the wire of same thickness and same insulation in both? explain your answer.
Three 250 W heaters are connected in parallel to a 100 V supply, Calculate the resistance of each heater.
With reference to the diagram shown below calculate:
(i) The equivalent resistance between P and Q.
(ii) The reading of ammeter.
(iii) The electrical power between P and Q.
An electric lamp A of 40 W and another electric lamp B of 100 W are connected to 220 V supply. Calculate the ratio of their filament resistances?
Out of the three fuses with current ratings 5A, 10A, 15A, which one is to be connected in a geyser circuit marked 3 kW, 220V? Give reason for your answer.
The resistance of filament of an electric heater is 500 Ω It is operated at 200V for 1 hour daily. Calculate the current drawn by the heater and the energy consumed in joule.
A consumer uses 4 lamps of 60 watt, 2 lamps of 40 watt, and 2 lamps of 100 watt. All these are used for 6 hour daily. Find the total bill for 30 days when the rate of energy is 75 paise per unit and the meter rent is Rs. 1.
