Advertisements
Advertisements
प्रश्न
Name two gases which are filled in filament type electric light bulbs.
Advertisements
उत्तर
Two gases that are filled in the filament type of electric bulbs are:
(i) argon
(ii) nitrogen
APPEARS IN
संबंधित प्रश्न
What is the meaning of the symbol kWh? Which quantity does it represent?
Which of the following is likely to be the correct wattage for an electric iron used in our homes?
(a) 60 W
(b) 250 W
(c) 850 W
(d) 2000 W
How many joules of electrical energy are transferred per second by a 6 V; 0.5 A lamp?
(a) 30 J/s
(b) 12 J/s
(c) 0.83 J/s
(d) 3 J/s
When a current of 4.0 A passes through a certain resistor for 10 minutes, 2.88 × 104 J of heat are produced. Calculate
the power of the resistor.
the voltage across the resistor.
Write an expression for the electrical power spent in flow of current through a conductor in terms of
(a) Resistance and potential difference, (b) current and resistance.
State and define the household unit of electricity.
What is the resistance, under normal working conditions of a 240 V electric lamp rated at 60 W? If two such lamps are connected in series across a 240 V mains supply, explain why each one appears less bright.
An electric bulb is rated 250 W, 230 V. Calculate:
- the energy consumed in one hour
- the time in which the bulb will consume 1.0 kWh energy when connected to 230 V mains.
The diagram above shows a circuit with the key k open. Calculate :
(i) the resistance of the circuit when the key k is open.
(ii) the current drawn from the cell when the key k is open.
(iii) the resistance of the circuit when the key k is closed.
(iv) the current drawn from the cell when the key k is closed.
Two resistors A and B of 4 Ω and 6 Ω respectively are connected in parallel. The combination is connected across a 6 volt battery of negligible resistance. Calculate the power supplied by the battery.
What is electric power? State and define its S.I. unit.
Why is heating element wound on a long porcelain rod in a room heater.
What would happen and why, to an electric bulb when it is connected across a supply of voltage (i) lower (ii) higher than its proper rating?
An electric bulb is marked 100 W, 230 V. What does this mean?
An electric heater is rated 220 V, 550 W. What does this statement mean?
How does earthing prevent electrical shock?
An electric kettle is rated 3kW, 250V. What should be the current capacity of the fuse with it?
A student wants to use an electric heater, an electric bulb and an electric fan simultaneously.
How should these gadgets be connected with the mains? Justify your answer giving three reasons.
