हिंदी

Name Two Gases Which Are Filled in Filament Type Electric Light Bulbs. - Science

Advertisements
Advertisements

प्रश्न

Name two gases which are filled in filament type electric light bulbs.

Advertisements

उत्तर

Two gases that are filled in the filament type of electric bulbs are:
(i) argon
(ii) nitrogen

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 1: Electricity - Exercise 8

APPEARS IN

लखमीर सिंग Physics (Science) [English] Class 10
अध्याय 1 Electricity
Exercise 8 | Q 7

वीडियो ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्न

Name the quantity whose unit is (i) kilowatt, and (ii) kilowatt-hour.


A 2 kWh heater, a 200 W TV and three 100 W lamps are all switched on from 6 p.m. to 10 p.m. What is the total cost at Rs 5.50 per kWh?


An electric fan runs from the 230 V mains. The current flowing through it is 0.4 A. At what rate is electrical energy transferred by the fan?


At a given time, a house is supplied with 100 A at 220 V. How many 75 W, 220 V light bulb could be switched on in the house at the same time (if they are all connected in parallel)?


 State and define the household unit of electricity.


Water in an electric kettle connected to a 220 V supply took 5 minutes to reach its boiling point. How long would it have taken if the supply voltage had fallen to 200 V?


What do you mean by a cell?

What is a voltmeter? How is it connected in a circuit?

Describe the construction and working of a filament lamp. List the material used and state why they are suitable for their purpose in this lamp.

Fig . shows the essent ial features of a battery operated bell. The hammer strikes the gong when the swi tch is closed . State and explain the effect of using the following material successively to form the core.

(a) Plastic
(b) Steel
(c) Copper


Water in an electric kettle connected to a 220 V supply took 5 minutes to reach its boiling point. How long will it take if the supply voltage falls to 200 V?


An electric current is passed through a metallic wire. The wire gets heated up. Give the reason. Is it possible to melt the wire by passing a heavy current?


Why is heating coil wound in the form of a helix in electric stove?


Name a metal that is used as an electron emitter. Give one reason for using this metal.


If the rating of an electric bulb is 100W – 230V, Explain its meaning.


To minimise the power loss in the transmission cables connecting the power stations to homes and factories, the transmission cables carry current ______.

A family uses 8 kW of power. Direct solar energy is incident on the horizontal surface at an average rate of 200 W per square meter. If 20% of this energy can be converted to useful electrical energy, how large an area is needed to supply 8 kW?


If a heater coil rated lkW, 220 V is connected in series with an electric bulb of 100 W, 220 V and are supplied 200V, power consumed by the bulb in this circuit is ______.


The electrical power and current in the circuit relates by ______


An overhead tank of capacity 10 k litre is kept at the top of building 15 m high. Water falls in tank with speed 5`sqrt2` m/s. Water level is at a depth 5 m below ground. The tank is to be filled in `1/2` hr. If efficiency of pump is 67.5% electric power used is ______ W.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×