Advertisements
Advertisements
Question
Explain why an optical pyrometer (for measuring high temperatures) calibrated for an ideal black body radiation gives too low a value for the temperature of a red hot iron piece in the open but gives a correct value for the temperature when the same piece is in the furnace
Advertisements
Solution 1
An optical pyrometer calibrated for an ideal black body radiation gives too low a value for temperature of a red hot iron piece kept in the open.
Black body radiation equation is given by:
`E = sigma(T^4 - T_0^4)`
Where,
E = Energy radiation
T = Temperature of optical pyrometer
To = Temperature of open space
σ = Constant
Hence, an increase in the temperature of open space reduces the radiation energy.
When the same piece of iron is placed in a furnace, the radiation energy, E = σ T4
Solution 2
An optical pyrometer is based on the principle that the brightness of a glowing surface of a body depends upon its temperature. Therefore, if the temperature of the body is less than 600°C, the image formed by the optical pyrometer is not brilliant and we do not get the reliable result. It is for this reason that the pyrometer gives a very low value for the temperature of red hot iron in the open.
APPEARS IN
RELATED QUESTIONS
Why does blowing over a spoonful of hot tea cools it? Does evaporation play a role? Does radiation play a role?
Standing in the sun is more pleasant on a cold winter day than standing in shade. Is the temperature of air in the sun considerably higher than that of the air in shade?
A solid at temperature T1 is kept in an evacuated chamber at temperature T2 > T1. The rate of increase of temperature of the body is proportional to
Two bodies A and B having equal surface areas are maintained at temperature 10°C and 20°C. The thermal radiation emitted in a given time by A and B are in the ratio
A heated body emits radiation which has maximum intensity near the frequency v0. The emissivity of the material is 0.5. If the absolute temperature of the body is doubled.
(a) the maximum intensity of radiation will be near the frequency 2v0
(b) the maximum intensity of radiation will be near the frequency v0/2
(c) the total energy emitted will increase by a factor of 16
(d) the total energy emitted will increase by a factor of 8
The left end of a copper rod (length = 20 cm, area of cross section = 0.20 cm2) is maintained at 20°C and the right end is maintained at 80°C. Neglecting any loss of heat through radiation, find (a) the temperature at a point 11 cm from the left end and (b) the heat current through the rod. Thermal conductivity of copper = 385 W m−1°C−1.
A solid aluminium sphere and a solid copper sphere of twice the radius are heated to the same temperature and are allowed to cool under identically surrounding temperatures. Assume that the emissivity of both the spheres in the same. Find the ratio of (a) the rate of heat loss from the aluminium sphere to the rate of heat loss from the copper sphere and (b) the rate of fall of temperature of the aluminium sphere to the rate of fall of temperature of the copper sphere. The specific heat capacity of aluminium = 900 J kg−1°C−1 and that of copper = 390 J kg−1°C−1. The density of copper = 3.4 times the density of aluminium.
Calculate the amount of heat radiated per second by a body of surface area 12 cm2 kept in thermal equilibrium in a room at temperature 20°C. The emissivity of the surface = 0.80 and σ = 6.0 × 10−8 W m−2 K−4.
Wein's constant is 2892 × 10-6 SI unit and the value of λm for moon is 14.46 micron. The surface temperature of moon is ______.
A student says, "Heat from the Sun reaches Earth because air carries it across space." Which statement best explains why this is incorrect?
You place your hands near a burning candle and feel warmth on both sides of the flame. What does this observation mainly show?
Two identical metal tins with water are kept in sunlight. One is black and the other shiny. Why does water in the black tin become hotter?
Why are cooking utensils like pans made of metal but fitted with plastic or wooden handles?
According to Stefan–Boltzmann Law, if the temperature of a body is doubled (in Kelvin), the heat emitted by it becomes ______.
Thermal radiation is described as a two-step process. Which of the following correctly identifies both steps in the correct order?
In the experiment where a test tube of water is heated from the top with ice at the bottom, the ice does not melt. What is the primary reason for this?
Which of the following properties is shared by both thermal radiation and visible light?
