Advertisements
Advertisements
Question
An AND gate can be prepared by repetitive use of
(a) NOT gate
(b) OR gate
(c) NAND gate
(d) NOR gate.
Advertisements
Solution
(c) NAND gate
(d) NOR gate
APPEARS IN
RELATED QUESTIONS
Write the truth table for the combination of the gates shown. Name the gates used.
Identify the logic gates marked 'P' and 'Q' in the given circuit. Write the truth table for the combination.
You are given the two circuits as shown in following figure. Show that circuit
- acts as OR gate while the circuit
- acts as AND gate.
(a)
(b)
Write the truth table for a NAND gate connected as given in the following figure.
Hence identify the exact logic operation carried out by this circuit
Write the truth table for the circuits given in following figure consisting of NOR gates only. Identify the logic operations (OR, AND, NOT) performed by the two circuits.
(a)
(b)
Draw the schematic symbols for AND, OR, NOT and NAND gate
Draw logic symbol of an OR gate and write its truth table.
You are given a circuit below. Write its truth table. Hence, identify the logic operation carried out by this circuit. Draw the logic symbol of the gate it corresponds to.
What will be the values of input A and B for the Boolean expression `overline ((A +B) .(A*B)) =1?`
Show that \[AB + \overline {AB }\] is always 1.
The amplification factor of a triode operating in the linear region depends strongly on ____________ .
You are given a circuit as shown in the figure, which consists of the NAND gate. Identify the logic operation carried out by the two. Write the truth table. Identify the gates equivalent to the tow circuit.
The current obtained from a simple filterless rectifier is
A radar is sending out pules of 1 micro second duration at interval of 100 micro-second. The range of the radar is
An oscillator is nothing but an amplifier with
For the given circuit, the input digital signals are applied at the terminals A, B and C. What would be the output at the terminal y?
Truth table for the given circuit (Figure) is ______.
A logic circuit provides the output Y as per the following truth table:
| A | B | Y |
| 0 | 0 | 1 |
| 0 | 1 | 0 |
| 1 | 0 | 1 |
| 1 | 1 | 0 |
The expression for the output Y is:
