Advertisements
Advertisements
Question
A, B and C are the three forces each of magnitude 4 N acting in the plane of the paper as shown in Figure. The point O lies in the same plane.

- Which force has the least moment about O? Give a reason.
- Which force has the greatest moment about O? Give a reason.
- Name the forces producing
(a) Clockwise
(b) anticlockwise moments. - What is the resultant torque about the point O?
Advertisements
Solution
i. C, as force C is the closest to O.
ii. A, because force A is farthest from O.
-
- A and B are producing clockwise moment.
- Moments are occurring anticlockwise due to the C force.
iii. The clockwise moment of force about O
= Force × OA
= 4N × 0.9 m
= 3.6 Nm
The clockwise moment of force about O
= Force × OB
= 4N × 0.8 m
= 3.2 Nm
Hence, the total clockwise moment of the two forces is about O = (3.6 + 3.2) Nm
= 6.8 Nm
Now, the anticlockwise moment of force about O = Force × OB
= 4N × 0.6 m
= 2.4 Nm
The resultant torque about the point O = clockwise moments − anticlockwise moments
= 6.8 Nm − 2.4 Nm
= 4.4 Nm (clockwise)
APPEARS IN
RELATED QUESTIONS
A force is applied on (i) a non-rigid body and (ii) a rigid body. How does the effect of the force differ in the above two cases?
State the S.I. unit of moment of force.
Sleepers are used below the rails.
A spanner of length 10 cm is used to open a nut by applying a minimum force of 5.0 N. Calculate the moment of force required.
Name of S.I. unit of the rate of change in momentum.
State one way to reduce the moment of given force about a given axis of rotation.
A body is acted upon by two forces of magnitude F but in opposite directions. State the effect of the force if both forces act at the same point of the body.
A meter scale is provided at 10 cm mark and is balanced by suspending 400 g from 0 cm mark (fig.). Calculate the mass of meter scale.

The diagram shows a uniform metre rule weighing 100gf, pivoted at its centre O. Two weights 150gf and 250gf hang from the point A and B respectively of the metre rule such that OA = 40 cm and OB = 20 cm. Calculate :
the total clockwise moment about O

A uniform metre rule rests horizontally on a knife-edge at the 60 cm mark when a mass of 10 gram is suspended from one end. At which end must this mass be suspended? What is the mass of the rule?
