मराठी

Which of the Following Equation Shows the Correct Relationship Between Electrical Unit? 1a = 1c/S Or 1c= 1a/S - Science

Advertisements
Advertisements

प्रश्न

Which of the following equation shows the correct relationship between electrical unit? 

1A = 1C/s or 1c= 1A/s 

Advertisements

उत्तर

Because current, I = Q/t, the correct relationship is  

`1A= (1C)/(1s)` 

 

 

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 1: Electricity - Exercise 2

APPEARS IN

व्हिडिओ ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्‍न

A Radio Set Draws a Current of 0.36 a for 15 Minutes. Calculate the Amount of Electric Charge that Flows Through the Circuit. 


Why should the resistance of: 

a voltmeter be very large?


An electric circuit consisting of a 0.5 m long nichrome wire XY, an ammeter, a voltmeter, four cells of 1.5 V each and a plug key was set up.  

Following graph was plotted between V and I values: 

 

What would be the values of `V/I` rations when the potential difference is 0.8 V, 1.2 V and 1.6 V respectively?
What conclusion do you draw from these values?
 
What is the resistance of the wire? 


In the circuit diagram given below five resistances of 10 Ω, 40 Ω, 30 Ω, 20 Ω, and 60 Ω are connected as shown to a 12 V battery. 

  

Calculate:
(a) total resistance in the circuit. 

(b) total current flowing in the circuit.

 


Which effect of current is utilised in the working of an electric fuse?


What kind of plot would you except when current (I) is plotted against potential difference (V) for a conductor, at constant temperature?

What is the direction of electric current?

What do you mean by 'power-voltage' rating of electrical appliances?

In the circuit shown in fig. 6, find the reading of the ammeter A when the switch S is
(a) Opened.
(b) Closed.


What is meant by the term 'electromotive force' of a cell?

A 3 pin mains plug is fitted to the lead for a 1 kW electric kettle to be used on a 250 V A.C. supply. Which of the following statements is NOT correct?
(a) A 13 A fuse is the most appropriate value to use.
(b) The brown wire should be connected to the live side of the mains.


The circuit diagram in fig  shows two coils of an insulated copper wire wound on a cardboard tube. G is a center zero galvanometer.

(a) Describe what will happen when th e swi tch K is cl osed for severa l
seconds and then opened again .
(b) What will be the effect of repeating the experiment with an iron placed in the tube?


A primary of 800 turns is connected to a 220 V A.C. supply and the secondary has 8 turns. What will be the output voltage?

Transformers are usually designed so that their efficiency is as close to 100% as possible. Describe two features in transformer design which help to achieve high efficiency?

What should I choose ___________________

a. for decreasing resistance in a circuit.
(Resistors in series / Resistors in parallel)

b. for getting protection from electric current.
(Nickel / Ebonite)

c. to measure the current in the circuit?
(Ammeter/ Voltmeter) 

Two electric bulbs rated 100 W; 220 V and 60 W; 220 V are connected in parallel to electric mains of 220 V. Find the current drawn by the bulbs from the mains.


An electric bulb is marked 100 W, 250 V. How much current will the bulb draw if connected to a 250 V supply?


One unit of electrical energy consumed is equal to 1000 kilowatt-hour.


Which of the following represents voltage?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×