मराठी

What is the resistance between A and B in the figure given below? 10 Ω 20 Ω 30 Ω 10 Ω 20 Ω 10 Ω

Advertisements
Advertisements

प्रश्न

What is the resistance between A and B in the figure given below?

 

संख्यात्मक
Advertisements

उत्तर

The resistors of values 20 Ω, 10 Ω and 20 Ω are connected in series.

Therefore, their net resistance is:

R = 20 Ω + 10 Ω + 20 Ω

R = 50 Ω 

This combination of resistors is connected in parallel with that of value 30 Ω.

Therefore, the resistance R' is:

`1/(R') = 1/50 + 1/30`

`1/(R') = (3 + 5)/150`

R' = `150/8`

R' = 18.75 Ω

The resistance, R' is connected in series with the two resistors of values 10 Ω each. Hence, the total resistance between A and B is:

18.75 + 10 + 10 = 38.75 Ω

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 4: Electricity - Exercise 5 [पृष्ठ २३३]

APPEARS IN

लखमीर सिंह Physics Part 1 [English] Class 10
पाठ 4 Electricity
Exercise 5 | Q 50. | पृष्ठ २३३

संबंधित प्रश्‍न

Complete the following :-

(a)


Find the expression for resistors connected in series.


Find the equivalent resistance between points A and B.


Find the equivalent resistance between A and B


An electrical appliance has a resistance of 25 Ω. When this electrical appliance is connected to a 230 V supply line, the current passing through it will be:

(a) 0.92 A
(b) 2.9 A
(c) 9.2 A
(d) 92 A

 


 Give one example to show how the resistance depends on the nature of material of the conductor.


What possible values of resultant resistance one can get by combining two resistances, one of value 2 ohm and the other 6 ohm?


State the order of resistivity of (i) a metal, (ii) a semiconductor and (iii) an insulator. 


In series combination of resistances ______.


Name the following substance showing low resistivity.


Potential difference between two points of a wire carrying 2 ampere current is 0.1 volt. Calculate the resistance between these points.

What potential difference is needed to drive a current o f 1 A through a 5 Ω resistor?


Calculate the equivalent resistance of the following combination of resistor r1, r2, r3, and r4


Three resistors of 6.0 Ω, 2.0 Ω and 4.0 Ω are joined to an ammeter A and a cell of emf 6.0 V as shown in the following figure. Calculate :

  1. the effective resistance of the circuit.
  2. the reading of ammeter.


What material is used for making wire to prepare heating coils? Give a reason.


You are provided with three resistors of resistance 1.0 Ω, 2.0 Ω and 3.0 Ω How would you connect them to obtain the total effective resistance 1.5 Ω? Draw diagram of the arrangement and check it by calculations.


Two lamps of resistance 30Ω and 20Ω respectively are connected in series in a 110V circuit. Calculate:
(i) the total resistance in the circuit
(ii) the current in the circuit, and
(iii) the voltage drop across each lamp.


A metal wire of resistance 6 Ω is stretched so that its length is increased to twice its original length. Calculate its new resistance.


The resistance of two resistors joined in series is 8Ω and in parallel is 1.5Ω. Find the value of the two resistances.


In an electrical circuit, two resistors of 2 Ω and 4 Ω respectively are connected in series to a 6 V battery. The heat dissipated by the 4 Ω resistor in 5 s will be ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×