मराठी

The Wavelength of Light of a Particular Colour is 5800 å. (A) Express It in Metre.

Advertisements
Advertisements

प्रश्न

The wavelength of light of a particular colour is 5800 Å.
Express it in metre.

बेरीज
Advertisements

उत्तर

As we know, 1 m = 1010 Å

Given, Wavelength of light = 5800 Å

Substituting the value of wavelength in the relation above, we get,

1010 Å = 1 m

1 Å = 10-10 m

∴ 5800 Å = 5800 × 10-10 m

∴ 5800 Å = 5.8 × 10-7 m

Hence, wavelength of 5800 Å in m = 5.8 × 10 -7m.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 1: Measurements and Experimentation - Exercise 1 (A) [पृष्ठ १०]

APPEARS IN

सेलिना Concise Physics [English] Class 9 ICSE
पाठ 1 Measurements and Experimentation
Exercise 1 (A) | Q 1.2 | पृष्ठ १०

संबंधित प्रश्‍न

Which of the following measures a small length to high accuracy : metre rule , vernier callipers or screw gauge?


While measuring the length of a rod with a vernier callipers, below shows the position of its scales. What is the length of the rod? 


Which part of vernier callipers is used to measure the internal diameter of a hollow cylinder?


The thimble of a screw gauge has 50 divisions for one rotation. The spindle advances 1 mm when the screw is turned through two rotations.

  1. What is the pitch of the screw?
  2. What is the least count of screw gauge?
  3. When the screw gauge is used to measure the diameter of wire the reading on the sleeve is found to be 0.5 mm and reading on thimble is found, 27 divisions. What is the diameter of the wire in centimetres?

What do you understand by the following term as applied to screw gauge?

Zero error


What do you mean by the term pitch of a screw gauge?

State whether the following statement is true or false by writing T/F against it.

The ratchet of a screw gauge is used to measure the depth of a beaker.


What is the importance of a vernier scale?

Consider the following case where the zero of vernier scale and the zero of the main scale are clearly seen. If L.C. of the vernier calipers is 0.01 cm, write the zero error and zero correction of the following.


If the 47th division of the circular scale coincides with the zero of the main scale of a screw gauge of least count 0.01 mm and having 50 circular divisions, what is it's zero error?

Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×