Advertisements
Advertisements
प्रश्न
If 20 C of charge pass a point in a circuit in 1 s, what current is flowing?
Advertisements
उत्तर
Here:
Charge, Q = 20 C
Time, t = 1 s
We know that, I = Q/t
So:
Current, I = 20/1 = 20 A
Thus, the electric current flowing through the circuit is 20 A.
APPEARS IN
संबंधित प्रश्न
The SI unit of charge is volt.
Three 2 V cells are connected in series and used as a battery in a circuit.
How many joules of electrical energy does 1 C gain on passing through (i) one cell (ii) all three cells?
Which instrument is used to measure electric current? How should it be connected in a circuit?
A flash of lighting carries 10 C of charge which flows for 0.01 s. What is the current? If the voltage is 10 MV, what is the energy?
A battery of 9 V is connected in series with resistors of 0.2 Ω, 0.3 Ω, 0.4 Ω, 0.5 Ω and 0.12 Ω. How much current would flow through the 12 Ω resistor?
Which type of circuit, series or parallel, is preferred while connecting a large number of bulbs:
(b) for lighting inside the rooms of the hotel?
The circuit diagram (Fig.) shows a battery of e.m.f. 6 volts and internal
resistance of 0.8 Ω oonnected in series. Find the
(a) Current reoorded by the ammeter,
(b) P.d. across the terminals of the resistor B,
( c) Current passing through each of the resistors B, C and D, and
( d) P.d. across the terminals of the battery.

An electric iron is rated 750 W, 230 V. Calculate the electrical energy consumed by the press in 16 hours.
Which part of an electrical appliance is earthed?
An electrical gadget can give an electric shock to its user under certain circumstances. Mention any two of these circumstances.
Three resistances, of which two are equal when connected in series have an effective resistance of 30 ohms. When the three resistances are connected in parallel, the effective resistances is 3 ohms. Find the values of the individual resistances.
A current of 2A passing through the conductor produces 80 J of heat in 10 seconds. The resistance of the conductor is ______.
A charge of 400C flows through a conductor for 13 minutes and 20 seconds. Find the magnitude of the current flowing through the conductor.
