Advertisements
Advertisements
प्रश्न
Find the pressure 200m below the surface of the ocean if pressure on the free surface of liquid is one atmosphere. (Density of seawater = 1060 kg/m3)
Advertisements
उत्तर
Given:
h = 200m,
ρ = 1060 kg/m³,
P0 = 1.013 × 105
Pa, g = 9.8 m/s²
To find:
Presssure 200m below the surface
Solution:
Absolute pressure, P = P0 + hρg
= (1.013 x 105) + (200 x 1060) x (9.8)
= (1.013 × 105) + (20.776 × 105)
= 21.789 × 105
= 2.1789 MPa
APPEARS IN
संबंधित प्रश्न
Explain why Atmospheric pressure at a height of about 6 km decreases to nearly half of its value at the sea level, though the height of the atmosphere is more than 100 km
Toricelli’s barometer used mercury. Pascal duplicated it using French wine of density 984 kg m–3. Determine the height of the wine column for normal atmospheric pressure.
In problem 10.9, if 15.0 cm of water and spirit each are further poured into the respective arms of the tube, what is the difference in the levels of mercury in the two arms? (Specific gravity of mercury = 13.6)
Two vessels have the same base area but different shapes. The first vessel takes twice the volume of water that the second vessel requires to fill up to a particular common height. Is the force exerted by the water on the base of the vessel the same in the two cases? If so, why do the vessels filled with water to that same height give different readings on a weighing scale?
A man exerts same pressure on the ground whether he is standing or he is lying.
The unit of pressure is
Define the term ‘pressure’ and state its unit.
The base of a container measures 15 cm × 20 cm. It is placed on a table top. If the weight of the container is 60 N, what is the pressure exerted by the container on the table top?
The pressure in a liquid at two points in the same horizontal plane are equal. Consider an elevator accelerating upward and a car accelerating on a horizontal road. The above statement is correct in
Water flows through a horizontal tube of variable cross section. The area of cross section at A and B are 4 mm2 and 2 mm2 respectively. If 1 cc of water enters per second through A, find (a) the speed of water at A, (b) the speed of water at B and (c) the pressure difference PA − PB.
In a hydraulic lift, the input piston had surface area 30 cm2 and the output piston has surface area of 1500 cm2. If a force of 25 N is applied to the input piston, calculate weight/force on output piston.
Match the following.
| 1. | Density | hρg |
| 2. | 1 gwt | Milk |
| 3. | Pascal’s law | `"Mass"/" Volume"` |
| 4. | Pressure exerted by a fluid | Pressure |
| 5. | Lactometer | 980 dyne |
A chapatti maker is a machine which converts balls of dough into chapatties. What effect of force comes into play in this process?
It is difficult to cut cloth using a pair of scissors with blunt blades. Explain.
The total force exerted by a body normal to the surface is called ______.
Pressure can be increased by decreasing the force.
Assertion: The pressure at the bottom of the sea is lesser than that near the surface.
Reason: The pressure exerted by a liquid depends upon the depth of the liquid and density of the liquid.
Cooking in a place located at a higher altitude is difficult. Why?
Why do scuba divers wear a special suit while they go into deep sea levels?
Determine the pressure when a force of 200 N acts on the area
- 20 m2
- 8 m2
Give reasons why:
cutting edges of knives and axes are sharpened.
What is an Artisan aquifer?
Intermolecular forces are stronger in ______.
Scuba divers wear special suits to withstand ______.
Upthrust = weight of the fluid displaced – apparent weight of the object.
What is the SI unit of pressure?
The force exerted by liquid perpendicular to the surface of the body is equal to the product of ______ at that point.
Iceberg floats in water with part of it submerged. What is the fraction of the volume of iceberg submerged if the density of ice is ρi = 0.917 g cm–3?
