Advertisements
Advertisements
प्रश्न
Find the pressure 200m below the surface of the ocean if pressure on the free surface of liquid is one atmosphere. (Density of seawater = 1060 kg/m3)
Advertisements
उत्तर
Given:
h = 200m,
ρ = 1060 kg/m³,
P0 = 1.013 × 105
Pa, g = 9.8 m/s²
To find:
Presssure 200m below the surface
Solution:
Absolute pressure, P = P0 + hρg
= (1.013 x 105) + (200 x 1060) x (9.8)
= (1.013 × 105) + (20.776 × 105)
= 21.789 × 105
= 2.1789 MPa
APPEARS IN
संबंधित प्रश्न
A large He balloon of volume 1425 m3 is used to lift a payload of 400 kg. Assume that the balloon maintains constant radius as it rises. How high does it rise? [Take y0= 8000 m and `rho_"He"`= 0.18 kg m–3].
For a given thrust, pressure is more on a surface of large j area.
1 kgf = .............. (nearly).
Pressure is reduced if .................... increases.
The unit of pressure is
A body weighing 5 kgf, placed on a surface of area 0.1 m2, exerts a thrust on the surface equal to
Name two factors on which the pressure on a surface depends.
Why is the bottom part of the foundation of a building made wider?
A gum bottle rests on its base. If it is placed upside down, how does the thrust change?
How much thrust will be required to exert a pressure of 20,000 Pa on an area of 1 cm2.
A boy weighing 60 kgf stands on platform of dimensions 2.5 cm x 0.5 cm. What pressure in pascal does he exert?
If someone presses a pointed needle against your skin, you are hurt. But if someone presses a rod against your skin with the same force, you easily tolerate. Explain.
Water flows through a horizontal tube of variable cross section. The area of cross section at A and B are 4 mm2 and 2 mm2 respectively. If 1 cc of water enters per second through A, find (a) the speed of water at A, (b) the speed of water at B and (c) the pressure difference PA − PB.
In a hydraulic lift, the input piston had surface area 30 cm2 and the output piston has surface area of 1500 cm2. If a force of 25 N is applied to the input piston, calculate weight/force on output piston.
A water tank has four taps fixed at points A, B, C, D as shown in the following figure. The water will flow out at the same pressure from taps at
A brick is kept in three different ways on a table as shown in the following figure. The pressure exerted by the brick on the table will be
 |
 |
 |
| A | B | C |
The total force exerted by a body normal to the surface is called ______.
At higher altitudes, atmospheric pressure is ______.
Pressure can be increased by decreasing the force.
Why dams are made stronger and thicker at the bottom than at the top?
Give reasons why:
a single nail pricking the body is painful when compared to lying on a bed of nails.
The net force in a particular direction is called ______.
All flowing substances, both liquids, and gases are called ______.
The shape and size of the solids do not easily change.
Upthrust = weight of the fluid displaced – apparent weight of the object.
What is the SI unit of pressure?
What happens when pressure is increased in solids?
Assertion (A): Wide wooden sleepers are kept below railway lines to reduce pressure on the railway tracks and prevent them from sinking into the ground.
Reason (R): Pressure is directly proportional to the area in which it is acting.
Pressure is a scalar quantity because ______.
- it is the ratio of force to area and both force and area are vectors.
- it is the ratio of the magnitude of the force to area.
- it is the ratio of the component of the force normal to the area.
- it does not depend on the size of the area chosen.
