Advertisements
Advertisements
प्रश्न
Find the magnetization of a bar magnet of length 10 cm and cross-sectional area 4 cm2, if the magnetic moment is 2 Am2.
Advertisements
उत्तर
Given:
Mnet = 2 Am2, l = 10 cm = 10 x 10–2 m,
area of cross section =4 cm2 = 4 x 10–4 m2
To find:
magnetisation (MZ)
`M_z=M_"net"/V`
`V=lxx""cross sectional area`
`=(10xx10^-2xx4xx10^-4)`
`=4xx10^-5m^3`
From formula,
`M_z=2/(4xx10^-5)`
`M_z=50000 A/m`
The intensity of magnetisation is 50000 A/m.
APPEARS IN
संबंधित प्रश्न
The magnetic moment of a magnet of dimensions 5 cm × 2.5 cm × 1.25 cm is 3 Am2. Calculate the intensity of magnetization.
Give two points to distinguish between a paramagnetic and a diamagnetic substance ?
A long, straight wire carries a current i. The magnetising field intensity H is measured at a point P close to the wire. A long, cylindrical iron rod is brought close to the wire, so that the point P is at the centre of the rod. The value of H at P will ______________ .
Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.
The magnetic intensity H at the centre of a long solenoid carrying a current of 2.0 A, is found to be 1500 A m−1. Find the number of turns per centimetre of the solenoid.
The magnetic field inside a long solenoid of 50 turns cm−1 is increased from 2.5 × 10−3 T to 2.5 T when an iron core of cross-sectional area 4 cm2 is inserted into it. Find (a) the current in the solenoid (b) the magnetisation I of the core and (c) the pole strength developed in the core.
Answer the following question.
Define the term "Intensity" in the photon picture of electromagnetic radiation.
When a plate of magnetic material of size 10 cm × 0.5 cm × 0.2 cm (length, breath, and thickness respectively) is located in a magnetizing field of 0.5 × 104 A/m-1, then a magnetic moment of 0.5 Am2 is induced in it. Find the magnetic induction in the plate.
A magnetic material of susceptibility 3 × 10−4, and magnetic intensity is 4 × 10−4 Am−1. Then The magnetization in the units of Am−1 is ______.
What does the ratio of magnetization to magnetic intensity indicate?
A magnet of magnetic moment 3Am2 weighs 75 g. The density of the material of the magnet is 7500 kg/m3. what is magnetization?
Derive the relation between magnetic field intensity(H) and magnetization(M) for a magnetic material placed in a magnetic field.
The magnetic susceptibility of a paramagnetic material at - 73°C is 0.0075. Its value at - 173°C will be ______.
An iron rod is placed parallel to magnetic field of intensity 2000 A/m. The magnetic flux through the rod is 6 × 10−4 Wb and its cross-sectional area is 3cm2. The magnetic permeability of the rod in `"Wb"/("A" - "m")` is ____________.
The magnetic susceptibility is given by ______
A steel wire of length I has a magnetic moment M. It is then bent into a semicircular arc. The new magnetic moment is ______.
The magnetization of bar magnet of length 5 cm, cross-sectional area 2 cm2 and net magnetic moment 1 Am2 is ______.
A solenoid has core of a material with relative permeability 500 and its windings carry a current of 2 A. The number of turns of the solenoid is 500 per metre. The magnetization of the material is ______.
Coercivity of a magnet where the ferromagnet gets completely demagnetized is 6 x 103 Am-1. The minimum current required to be passed in a solenoid having 2000 turns per metre, so that the magnet gets completely demagnetized when placed inside the solenoid is ____________.
A bar magnet has coercivity 6 x 103 Am-1. It is desired to demagnetise it by inserting it inside a solenoid 10 cm long and having 40 turns. The current that should be sent through the solenoid is ____________.
An iron rod is placed parallel to magnetic field of intensity 4000 A/m. The magnetic flux through the rod is 8 x 10-4 Wb and its cross-sectional area is 4 cm2 . The magnetic permeability of the rod in Wb/A - m is ____________.
The permeability of a metal is 0.01256 TmA- 1 What is its relative permeability?
A magnet of magnetic moment 6 Am2 weighs 65 g. The density of the material of the magnet is 6500 kg/m3. What is the magnetization?
A magnetizing field of 5000 A/m produces a magnetic flux of 4 x 10-5 Wb in an iron rod of cross-sectional area 0.4 cm2. The permeability of the rod in Wb/A-m, is ______.
SI Unit of Magnetization is ____________.
Two parallel wires of equal lengths are separated by a distance of 3m from each other. The currents flowing through first and second wire is 3A and 4.5A respectively in opposite directions. The resultant magnetic field at the mid-point of both wire is (µ0 = permeability of free space).
A cylindrical magnetic rod has length 5 cm and diameter 1 cm. It has uniform magnetization `5.3 xx 10^3 "A"/"m"^3`. Its net magnetic dipole moment is nearly `(pi = 22/7)`.
Assertion: Susceptibility is defined as the ratio of intensity of magnetisation I to magnetic intensity H.
Reason: Greater the value of susceptibility, smaller the value of intensity of magnetisation I.
What is the magnetization of a bar magnet having length 5 cm and area of cross section 2 cm2? (M = 1 Am2)
The magnetic susceptibility of paramagnetic materials is ____________.
The variation of intensity of magnetization (I) and applied magnetic field intensity (H) for three magnetic materials A, B, C are shown in the graph. The material A is ____________.
Magnetization of a sample is ______.
Magnetic intensity is given by ______.
Magnetic lines of force due to a bar magnet do not intersect because ______.
One can define ...A... of a place as the vertical plane which passes through the imaginary line joining the magnetic North and the South–poles. Here, A refers to ______.
The earth behaves as a magnet with magnetic field pointing approximately from the geographic ______.
Magnetic permeability is maximum for ______
What are the dimensions of χ, the magnetic susceptibility? Consider an H-atom. Guess an expression for χ, upto a constant by constructing a quantity of dimensions of χ, out of parameters of the atom: e, m, v, R and µ0. Here, m is the electronic mass, v is electronic velocity, R is Bohr radius. Estimate the number so obtained and compare with the value of |χ| ~ 10–5 for many solid materials.
Define magnetization.
An example of a perfect diamagnet is a superconductor. This implies that when a superconductor is put in a magnetic field of intensity B, the magnetic field B inside the superconductor will be such that ______.
State unit and dimensions of Magnetic susceptibility.
The magnetization of a bar magnet of length 4 cm, cross-sectional area 1 cm2 and magnetic moment 2 SI units is ______.
