मराठी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान इयत्ता ११

Mark Out the Correct Options. (A) Diamagnetism Occurs in All Materials. (B) Diamagnetism Results from the Partial Alignment of Permanent Magnetic Moment.

Advertisements
Advertisements

प्रश्न

Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.

थोडक्यात उत्तर
Advertisements

उत्तर

(a) Diamagnetism occurs in all materials.
(d) The magnetic field of induced magnetic moment is opposite the applied field.

 

When a material is placed in magnetic field, dipole moment are induced in the atoms by the applied magnetic field. Since the direction of magnetic field due to induced dipole moment is opposite to the applied magnetic field. Therefore, resultant magnetic field is smaller than the applied magnetic field. This process is called diamagnetism. As this process takes place for all the material, therefore all the material exhibit diamagnetism. Hence, option (a) and (d) are correct.

Diamagnetic material do not have permanent magnetic moment on their own. When they are placed in magnetic field, dipole moments are induced by the applied magnetic field. Thus, there is no net alignment of permanent magnetic moment so these mterials do not have any permanenet magnetic momentof their own. Hence, option (b) is incorrect.

Magnetic field intensity is not zero in free space. Hence, option (c) is incorrect.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 37: Magnetic Properties of Matter - MCQ [पृष्ठ २८६]

APPEARS IN

एचसी वर्मा Concepts of Physics Volume 1 and 2 [English]
पाठ 37 Magnetic Properties of Matter
MCQ | Q 6 | पृष्ठ २८६

संबंधित प्रश्‍न

The magnetic moment of a magnet of dimensions 5 cm × 2.5 cm × 1.25 cm is 3 Am2. Calculate the intensity of magnetization.


A long, straight wire carries a current i. The magnetising field intensity H is measured at a point P close to the wire. A long, cylindrical iron rod is brought close to the wire, so that the point P is at the centre of the rod. The value of H at P will ______________ .


The magnetic intensity H at the centre of a long solenoid carrying a current of 2.0 A, is found to be 1500 A m−1. Find the number of turns per centimetre of the solenoid.


The magnetic field inside a long solenoid of 50 turns cm−1 is increased from 2.5 × 10−3 T to 2.5 T when an iron core of cross-sectional area 4 cm2 is inserted into it. Find (a) the current in the solenoid (b) the magnetisation I of the core and (c) the pole strength developed in the core.


Answer the following question.
Define the term "Intensity" in the photon picture of electromagnetic radiation.


When a plate of magnetic material of size 10 cm × 0.5 cm × 0.2 cm (length, breath, and thickness respectively) is located in a magnetizing field of 0.5 × 104 A/m-1, then a magnetic moment of 0.5 Am2 is induced in it. Find the magnetic induction in the plate.


What is the magnetization of a bar magnet having a length of 6 cm and the area of cross-section 5 cm2?


The moment of a magnet (15 cm × 2 cm × 1 cm) is 1.2 A-m2. What is its intensity of magnetization?  


Define magnetic intensity.


The magnetic susceptibility of a paramagnetic material at - 73°C is 0.0075. Its value at - 173°C will be ______.


An iron rod is placed parallel to magnetic field of intensity 2000 A/m. The magnetic flux through the rod is 6 × 10−4 Wb and its cross-sectional area is 3cm2. The magnetic permeability of the rod in `"Wb"/("A" - "m")` is ____________.


Relative permeability of nickel is 550, then its magnetic susceptibility will be ____________.


The permeability of a metal is 0.01256 TmA- 1  What is its relative permeability?


A magnetizing field of 5000 A/m produces a magnetic flux of 4 x 10-5 Wb in an iron rod of cross-sectional area 0.4 cm2. The permeability of the rod in Wb/A-m, is ______.


The magnetic susceptibility of paramagnetic materials is ____________.


A particle of charge 'q' and mass 'm' moves in a circular orbit of radius 'r' with angular speed `omega`. The ratio of the magnitude of its magnetic moment to that of its angular momentum is ____________.


The magnetic moment produced in a sample of 2 gram is 8 x 10-7 A/m2. lf its density is 4g/cm3, then the magnetization of the sample is ____________.


An example of a perfect diamagnet is a superconductor. This implies that when a superconductor is put in a magnetic field of intensity B, the magnetic field B inside the superconductor will be such that ______.


A bar magnet has length 3 cm, cross-sectional area 2 cm3 and magnetic moment 3 Am2. The intensity of magnetisation of bar magnet is ______.


For a medium of permeability µ, its magnetic susceptibility x is [µ 0 = permeability of vacuum]


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×