Advertisements
Advertisements
प्रश्न
Find the magnetization of a bar magnet of length 10 cm and cross-sectional area 4 cm2, if the magnetic moment is 2 Am2.
Advertisements
उत्तर
Given:
Mnet = 2 Am2, l = 10 cm = 10 x 10–2 m,
area of cross section =4 cm2 = 4 x 10–4 m2
To find:
magnetisation (MZ)
`M_z=M_"net"/V`
`V=lxx""cross sectional area`
`=(10xx10^-2xx4xx10^-4)`
`=4xx10^-5m^3`
From formula,
`M_z=2/(4xx10^-5)`
`M_z=50000 A/m`
The intensity of magnetisation is 50000 A/m.
APPEARS IN
संबंधित प्रश्न
What is Magnetization?
The magnetic moment of a magnet of dimensions 5 cm × 2.5 cm × 1.25 cm is 3 Am2. Calculate the intensity of magnetization.
State formula and S.I. unit of Magnetization.
Give two points to distinguish between a paramagnetic and a diamagnetic substance ?
A long, straight wire carries a current i. The magnetising field intensity H is measured at a point P close to the wire. A long, cylindrical iron rod is brought close to the wire, so that the point P is at the centre of the rod. The value of H at P will ______________ .
Which of the following pairs has quantities of the same dimensions?
(a) Magnetic field B and magnetising field intensity H
(b) Magnetic field B and intensity of magnetisation I
(c) Magnetising field intensity H and intensity of magnetisation I
(d) Longitudinal strain and magnetic susceptibility
Mark out the correct options.
(a) Diamagnetism occurs in all materials.
(b) Diamagnetism results from the partial alignment of permanent magnetic moment.
(c) The magnetising field intensity, H, is always zero in free space.
(d) The magnetic field of induced magnetic moment is opposite the applied field.
The magnetic intensity H at the centre of a long solenoid carrying a current of 2.0 A, is found to be 1500 A m−1. Find the number of turns per centimetre of the solenoid.
The magnetic field inside a long solenoid of 50 turns cm−1 is increased from 2.5 × 10−3 T to 2.5 T when an iron core of cross-sectional area 4 cm2 is inserted into it. Find (a) the current in the solenoid (b) the magnetisation I of the core and (c) the pole strength developed in the core.
Assume that each iron atom has a permanent magnetic moment equal to 2 Bohr magnetons (1 Bohr magneton equals 9.27 × 10−24 A m2). The density of atoms in iron is 8.52 × 1028 atoms m−3. (a) Find the maximum magnetisation I in a long cylinder of iron (b) Find the maximum magnetic field B on the axis inside the cylinder.
At a certain temperature, a ferromagnetic material becomes paramagnetic. What is this temperature called?
Answer the following question.
Define the term "Intensity" in the photon picture of electromagnetic radiation.
When a plate of magnetic material of size 10 cm × 0.5 cm × 0.2 cm (length, breath, and thickness respectively) is located in a magnetizing field of 0.5 × 104 A/m-1, then a magnetic moment of 0.5 Am2 is induced in it. Find the magnetic induction in the plate.
A magnet of magnetic moment 3Am2 weighs 75 g. The density of the material of the magnet is 7500 kg/m3. what is magnetization?
An iron rod is placed parallel to magnetic field of intensity 2000 A/m. The magnetic flux through the rod is 6 × 10−4 Wb and its cross-sectional area is 3cm2. The magnetic permeability of the rod in `"Wb"/("A" - "m")` is ____________.
An electron moves in a circular orbit with uniform speed v. It produces a magnetic field B at the centre of the circle. The radius of the circle is [µ0 = permeability of free space, e = electronic charge]
For an isotropic medium B, µ, H and M, are related as (where B, µ0, H and Mz have their usual meaning in the context of magnetic material) ____________.
The magnetization of bar magnet of length 5 cm, cross-sectional area 2 cm2 and net magnetic moment 1 Am2 is ______.
Coercivity of a magnet where the ferromagnet gets completely demagnetized is 6 x 103 Am-1. The minimum current required to be passed in a solenoid having 2000 turns per metre, so that the magnet gets completely demagnetized when placed inside the solenoid is ____________.
An iron rod is placed parallel to magnetic field of intensity 4000 A/m. The magnetic flux through the rod is 8 x 10-4 Wb and its cross-sectional area is 4 cm2 . The magnetic permeability of the rod in Wb/A - m is ____________.
A magnetizing field of 5000 A/m produces a magnetic flux of 4 x 10-5 Wb in an iron rod of cross-sectional area 0.4 cm2. The permeability of the rod in Wb/A-m, is ______.
Two parallel wires of equal lengths are separated by a distance of 3m from each other. The currents flowing through first and second wire is 3A and 4.5A respectively in opposite directions. The resultant magnetic field at the mid-point of both wire is (µ0 = permeability of free space).
A cylindrical magnetic rod has length 5 cm and diameter 1 cm. It has uniform magnetization `5.3 xx 10^3 "A"/"m"^3`. Its net magnetic dipole moment is nearly `(pi = 22/7)`.
The dimensions of the relative magnetic permeability of the substance are ______.
If Mz = magnetization of a paramagnetic sample, B external magnetic field, T = absolute temperature, C = curie constant then according to Curie's law in magnetism, the correct relation is ______.
A bar magnet having length 5 cm and area of cross-section 4cm2 has magnetic moment 2Am2. If magnetic susceptibility is 5 x 10-6, the magnetic intensity will be ____________.
A particle of charge 'q' and mass 'm' moves in a circular orbit of radius 'r' with angular speed `omega`. The ratio of the magnitude of its magnetic moment to that of its angular momentum is ____________.
The variation of intensity of magnetization (I) and applied magnetic field intensity (H) for three magnetic materials A, B, C are shown in the graph. The material A is ____________.
Magnetization of a sample is ______.
A bar magnet has length 3 cm, cross-sectional area 4 cm2, and magnetic moment 6 Am2. The intensity of magnetisation of bar magnet is ______.
Two parallel conducting wires of equal lengths placed distance 'd' apart carry currents 'I1' and 'I2' respectively in opposite directions. The resultant magnetic field at the midpoint of both the wires is ______.
(µ0 = permeability of free space.)
If `vec"H"` = magnetic intensity, `chi` = susceptibility, magnetic moment per unit volume `vec"M"` equals ______.
A magnetic needle of magnetic moment 6.7 × 10–2 Am2 and moment of inertia 7.5 × 10–6 kg m2 is performing simple harmonic oscillations in a magnetic field of 0.01 T. Time taken for 10 complete oscillations is ______.
The earth behaves as a magnet with magnetic field pointing approximately from the geographic ______.
What are the dimensions of χ, the magnetic susceptibility? Consider an H-atom. Guess an expression for χ, upto a constant by constructing a quantity of dimensions of χ, out of parameters of the atom: e, m, v, R and µ0. Here, m is the electronic mass, v is electronic velocity, R is Bohr radius. Estimate the number so obtained and compare with the value of |χ| ~ 10–5 for many solid materials.
What is magnetic susceptibility?
A bar magnet has length 3 cm, cross-sectional area 2 cm3 and magnetic moment 3 Am2. The intensity of magnetisation of bar magnet is ______.
State unit and dimensions of Magnetic susceptibility.
The magnetization of a bar magnet of length 4 cm, cross-sectional area 1 cm2 and magnetic moment 2 SI units is ______.
An iron rod is subjected to a magnetising field of 1200 Am-1 .The susceptibility of iron is 599. Find the permeability and the magnetic field produced.
