Advertisements
Advertisements
प्रश्न
A spanner of length 10 cm is used to open a nut by applying a minimum force of 5.0 N. Calculate the moment of force required.
Advertisements
उत्तर
⊥ Distance = 10cm = 10/100 = 1/10 m
Force applied on spanner 5 N
∴ Moment of force = F ×⊥ distance
= 5 × 1/10 = 0.5 nm.
APPEARS IN
संबंधित प्रश्न
A half metre rod is pivoted at the centre with two weights of 20gf and 12gf suspended at a perpendicular distance of 6 cm and 10 cm from the pivot respectively as shown below.
1) Which of the two forces acting on the rigid rod causes clockwise moment?
2) Is the rod in equilibrium?
3) The direction of 20 kgf force is reversed. What is the magnitude of the resultant moment of the forces on the rod?
In Fig. a force F is applied in a direction passing through the pivoted point O of the body. Will the body rotate? Give reason to support your answer.
Find the moment of force of 20 N about an axis of rotation at distance 0.5 m from the force.
Name and define the S.I. and C.G.S. units of force. How are they related?
A car of mass 600 kg is moving with a speed of 10 m-1 while a scooter of mass 80 kg is moving with speed of 50 m s-1. which vehicle will require more force to stop it in the (1) same interval of time (2) same distance
Two forces each of magnitude 10 N act vertically upwards and downwards respectively at the two ends A and B of a uniform rod of length 4 m which is pivoted at its midpoint O as shown in the figure. Determine the magnitude of the resultant moment of forces about the pivot O.
Calculate the resultant moment of forces about O and state its direction in fig.
Fig. 5 shows a uniform meter scale weighing 200 gf. Provided at its centre. Two weights 300 gf and 500 gf are suspended from the ruler as shown in the diagram. Calculate the resultant torque of the ruler and hence calculate the distance from mid-point where a 100 gf should be suspended to balance the meter scale.
What is meant by the term ‘moment of force’? If the moment of force is assigned a negative sign then will the turning tendency of the force be clockwise or anti-clockwise?
A door lock is opened by turning the lever (handle) of length 0.2 m. If the moment of force produced is 1 Nm, then the minimum force required is ______.
