Advertisements
Advertisements
प्रश्न
A spanner of length 10 cm is used to open a nut by applying a minimum force of 5.0 N. Calculate the moment of force required.
Advertisements
उत्तर
⊥ Distance = 10cm = 10/100 = 1/10 m
Force applied on spanner 5 N
∴ Moment of force = F ×⊥ distance
= 5 × 1/10 = 0.5 nm.
APPEARS IN
संबंधित प्रश्न
A half metre rod is pivoted at the centre with two weights of 20gf and 12gf suspended at a perpendicular distance of 6 cm and 10 cm from the pivot respectively as shown below.
1) Which of the two forces acting on the rigid rod causes clockwise moment?
2) Is the rod in equilibrium?
3) The direction of 20 kgf force is reversed. What is the magnitude of the resultant moment of the forces on the rod?
The hand flour grinder is provided with a handle near the rim.
Name and define the S.I. and C.G.S. units of force. How are they related?
A car of mass 600 kg is moving with a speed of 10 m-1 while a scooter of mass 80 kg is moving with speed of 50 m s-1. which vehicle will require more force to stop it in the (1) same interval of time (2) same distance
Two forces each of magnitude 10 N act vertically upwards and downwards respectively at the two ends A and B of a uniform rod of length 4 m which is pivoted at its midpoint O as shown in the figure. Determine the magnitude of the resultant moment of forces about the pivot O.
The figure shows two forces each of magnitude 10 N acting at the point A and B at a separation of 50 cm, in opposite directions. Calculate the resultant moment of two forces about the point.
- A,
- B and
- O situated exactly at the middle of the two forces.
Fig. shows a uniform meter scale weighing 100 N pivoted at its centre. Two weights of 500 N and 300 N are hung from the ruler as shown in fig.
(i) Calculate total clockwise and anticlockwise moments.
(ii) Calculate difference in clockwise moment and anticlockwise moment.
(iii) Calculate the distance from O where a 100 N weight should be suspended to balance the meter scale.
A meter scale is provided at 10 cm mark and is balanced by suspending 400 g from 0 cm mark (fig.). Calculate the mass of meter scale.
Clockwise moment produced by a force about a fulcrum is considered to be ______.
