Advertisements
Advertisements
प्रश्न
Write preparation, properties, and uses of Teflon.
Advertisements
उत्तर
Preparation of Teflon:
- The monomer used in the preparation of Teflon is tetrafluoroethylene (CF2 = CF2), which is a gas at room temperature.
- Tetrafluoroethylene is polymerized by using free-radical initiators such as hydrogen peroxide or ammonium persulphate at high pressure to produce polytetrafluoroethylene (Teflon).
\[\ce{\underset{Tetrafluoroethylene}{{n} CF2 = CF2} ->[Polymerization][Peroxide]\underset{Teflon}{[-CF2 - CF2 -]}_{n}}\]
Properties of Teflon:
- Teflon is tough, chemically inert, and resistant to heat and attack by corrosive reagents.
- C – F bond is very difficult to break and remains unaffected by corrosive alkali and organic solvents.
Uses: Teflon is used in making non-stick cookware, oil seals, gaskets, etc.
संबंधित प्रश्न
Write any ‘two’ uses of terylene.
Write the reactions involved in the preparation of PVC
Write the chemical reaction to prepare novolac polymer.
Write the formulae of the raw materials used for preparation of Dextran.
The Zieglar-Natta catalyst is used in the preparation of _______.
(A) LDPE
(B) PHBV
(C) PAN
(D) HDPE
Write the structure of melamine.
Write the structures of the monomers used for getting the following polymers
Melamine – formaldehyde polymer
Answer the following in one sentence.
Identify thermoplastic and thermosetting plastic from the following:
- PET
- Urea formaldehyde resin
- Polythene
- Phenol formaldehyde resin
Answer the following.
Write structure of natural rubber and neoprene rubber along with the name and structure of their monomers.
Answer the following.
Draw the structures of polymers formed from the following monomers
H2N–(CH2)5 – COOH
Answer the following.
Write name and formula of raw material from which bakelite is made.
Identify condensation polymers and addition polymers from the following.
-(CH2 - CH = CH - CH2 -)n
Attempt the following:
Write the chemical reactions involved in the manufacture of Nylon 6,6.
Attempt the following:
What is meant by LDP and HDP? Mention the basic difference between the same with suitable examples.
Answer the following.
Write main specialities of Buna-S, Neoprene rubber?
Write the name of the catalyst used for preparation of high density polythene polymer.
Monomer of natural rubber is __________
Write the name of one example of each polymer in which following repeating units.
\[\begin{array}{cc}
\ce{(-CF2-CF2-), -[NH-(CH2)5-CO] -, -(CH2-CH-), (-CH2-CH2-)}\\
\phantom{............................}|\\
\phantom{..............................}\ce{CN}
\end{array}\]
Define rubber.
Which of the following polymer is used in paints?
Identify additional polymers from the following.
I. \[\begin{array}{cc}
\ce{-(CH2 - CH -)_{{n}}}\\
\phantom{....}|\\
\phantom{.......}\ce{C6H5}
\end{array}\]
II. \[\ce{-(CH2 - CH = CH - CH2 -)_{{n}}}\]
III. \[\ce{-(CO(CH2)4 - CONH(CH2)6NH -)_{{n}}}\]
IV.
Identify the CORRECT statement regarding the following polymer.
\[\begin{array}{cc}
\phantom{....}\ce{O}\phantom{............}\ce{O}\phantom{...................}\ce{H}\phantom{.....}\\
\phantom{....}||\phantom{.............}||\phantom{...................}|\phantom{......}\\
\ce{-[C - (CH2)4 - C - NH - (CH2)6 - N -]_{{n}}}
\end{array}\]
Identify the INCORRECT match.
Which of the following is the monomer of neoprene?
\[\ce{{n} CH2 = CH2 ->[333 K - 343 K][6 - 7 atm, catalyst] X}\]
Which of the following is CORRECT about polymer 'X'?
Which of the following polymers is obtained from chloroprene?
Which of the following polymers is a heteropolymer?
Which among the following polymers can NOT be remoulded?
Which among the following polymers is obtained from CH2 = CH – CN by polymerisation?
Identify the monomers used in the preparation of Novolac.
Identify the catalyst used in the manufacture of high density polythene.
Which of the following polymer is used to make blankets?
Which of the following polymers is used as insulation for cables?
The commercial name of polyacrylonitrile is ______.
Name the polymers used in laminated sheets and give the name of monomeric units involved in its formation.
The monomer of Teflon is ______.
Which of the following polymers is synthesized using a free radical polymerisation technique?
Nylon threads are made of ______.
The catalyst used for the polymerisation of olefins is ______.
Which of the foolowing polymer is used in the manufacture of insulators.
The monomer of natural rubber is ______.
Answer the following.
Write the structure of isoprene and the polymer obtained from it.
Answer the following.
Name and draw structure of the repeating unit in natural rubber.
Name and draw structure of the repeating unit in natural rubber.
Write the name of the monomer of natural rubber.
Match the following pairs:
| Polymer | Monomer | ||
| (i) | Teflon | (a) | CH2 = CH2 |
| (ii) | PVC | (b) | CF2 = CF2 |
| (iii) | Natural rubber | (c) | Isoprene |
| (iv) | Polythene | (d) | H2C=CHCl |
The monomer used in preparation of teflon is ______.
Write the structure of isoprene and the polymer obtained from it.
Name and draw the structure of the repeating unit in natural rubber.
Name and draw structure of the repeating unit in natural rubber.
Name and draw the structure of the repeating unit in natural rubber.
Identify polyamide polymer from following.
