Advertisements
Advertisements
प्रश्न
Which of the following statements about a series LCR circuit connected to an ac source is correct?
विकल्प
If the frequency of the source is increased, the impedance of the circuit first decreases and then increases.
If the net reactance (XL - XC) of the circuit becomes equal to its resistance, then the current leads the voltage by 45°.
At resonance, the voltage drop across the inductor is more than that across the capacitor.
At resonance, the voltage drop across the capacitor is more than that across the inductor.
Advertisements
उत्तर
If the net reactance (XL - XC) of the circuit becomes equal to its resistance, then the current leads the voltage by 45°.
Explanation:
For an LCR circuit,
`tanphi = (X_L - X_C)/R`
If XL - XC = R
`tanphi = R/R`
`tanphi = 1 ⇒ phi = 45^circ`
APPEARS IN
संबंधित प्रश्न
Define 'quality factor' of resonance in a series LCR circuit. What is its SI unit?
A voltage V = V0 sin ωt is applied to a series LCR circuit. Derive the expression for the average power dissipated over a cycle. Under what condition (i) no power is dissipated even though the current flows through the circuit, (ii) maximum power is dissipated in the circuit?
The magnetic field at a point inside a 2.0 mH inductor-coil becomes 0.80 of its maximum value in 20 µs when the inductor is joined to a battery. Find the resistance of the circuit.
What will be the potential difference in the circuit when direct current is passed through the circuit?
Keeping the source frequency equal to the resonating frequency of the series LCR circuit, if the three elements, L, C and R are arranged in parallel, show that the total current in the parallel LCR circuit is minimum at this frequency. Obtain the current rms value in each branch of the circuit for the elements and source specified for this frequency.
For a series LCR-circuit, the power loss at resonance is ______.
In series combination of R, L and C with an A.C. source at resonance, if R = 20 ohm, then impedence Z of the combination is ______.
The resonant frequency of a RF oscillator is 1 MHz and its bandwidth is 10 kHz. The quality factor will be :
A series LCR circuit containing a 5.0 H inductor, 80 µF capacitors, and 40 Ω resistor is connected to a 230 V variable frequency ac source. The angular frequencies of the source at which power is transferred to the circuit are half the power at the resonant angular frequency are likely to be ______.
