Advertisements
Advertisements
प्रश्न
What is the function of the split rings in a d.c. motor?
Advertisements
उत्तर
The split ring atts as a commutator in a d.c. motor. With the split ring, the direction of current through the coil is reversed after every half rotation of coil and thus the direction of couple rotating the coil remains unchanged and the coil continues to rotate in the same direction.
APPEARS IN
संबंधित प्रश्न
An electric bulb is rated 220 V and 100 W. When it is operated on 110 V, the power consumed will be ______.
Name the physical quality which is measured in
(i) Kw (ii) kWh
An electric bulb is rated ‘100 W, 250 V’. How much current will the bulb draw if connected to a 250 V supply?
A battery of e.m.f 15 V and internal resistance 2 Ω is connected to two resistors of resistance 4 ohm and 6 ohm joined in series. Find the electrical energy spent per minute in 6 ohm resistor.
A servo voltage stabiliser restricts the voltage output to 220 V ± 1%. If an electric bulb rated at 220 V, 100 W is connected to it, what will be the minimum and maximum power consumed by it?
The diagram below shows a magnetic kept just below the conductor AB which is kept in North South direction.
(i) In which direction will the needle deflect when the key is closed ?
(ii) Why is the deflection produced ?
(iii) What will be the change in the deflection if the magnetic needle is taken just above the conductor AB ?
(iv) Name one device which works on this principle.
How does the heat produced by die passage of current in a metallic wire depend on the time of passage of current in the wire?
How can electric energy consumed by an electric appliance be calculated in kilowatt hour (kWh)?
What is the commercial unit of electrical energy? Represent it in terms of joules.
